Product Description:

The 5PP120.1043-K09 operator terminal is produced by B&R Automation as part of the 5PP Power Panels series. Designed for distributed machine control, it merges a controller, a color display, and field interfaces inside one housing. This architecture lets builders place intelligence directly on the door of packaging, assembly, or material-handling stations while reserving the main cabinet for power components. The panel’s purpose in industrial automation is to present process graphics, register touch commands, and relay data to higher-level networks without adding a separate industrial PC.

Its front bezel carries a 10.4 in active area built with TFT color technology, allowing clear depiction of alarms and trend curves. Operator actions are entered through the integrated touchscreen, which replaces mechanical push buttons and permits dynamic soft keys that change with machine states. Communication to plant networks is handled by the built-in Ethernet TCP/IP port, so recipes or production counts can move directly to supervisory systems. The electronics draw power from a nominal 24 VDC source, letting the panel connect to the same low-voltage bus that feeds sensors and compact I/O modules.

Legacy peripherals are supported through an RS232 interface that offers point-to-point connectivity for label printers or serial computers. For storage and transportation, the device tolerates ambient lows down to -20 °C and highs up to 70 °C, protecting the display glass and processor from temperature-related stress. The designation Power Panel PP120 further identifies the internal performance tier, so application code can be matched to the available computing resources. This arrangement allows the terminal to support both machine-level visualization and direct data exchange through its built-in interfaces.