5PC94:0 5737.027-00
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 5PC9:405737.027-00 unit is constructed from 16MnCr5 material, features 23 teeth with a module of 3.5, and has a bore diameter of 35 mm along with a face width of 30 mm. Part of the 5PC Industrial Automation Units by B & R Automation, it boasts a case-hardened hardness of 58-62 HRC and adheres to the DIN 3962 standard.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5PC940 5737.027-00 industrial automation unit by B & R automationis operated with a nominal voltage of 24 VDC and allows a tolerance of ±25%. The nominal current drawn by the system is 3.5 A. It experiences a typical inrush current of 6 A and a maximum of 10 A lasting under 300 microseconds. The unit is capable of operating at altitudes up to 3000 meters depending on internal components.
The 5PC940 5737.027-00 industrial automation unit includes an Intel-based processor that manages system operations proficiently. Dual Ethernet ports labeled ETH1 and ETH2 are provided for communication purposes. These Ethernet ports support both network redundancy and segmented communication functions. ETH1 and ETH2 have MAC addresses 00-60-63-8b-b5-f9 and 00-60-63-8b-b7-4a respectively. The unit has two USB ports marked USB1 and USB2 which offer external connectivity support. A CFast card slot allows high speed storage for the operating system or data. Hot swapping is not permitted while powered on to prevent damage. The status LEDs are present for Power, Power Link, CFast and Run states. The 5PC Industrial Automation Unit is designed for operating environments from 0°C to 55°C. It is serial numbered KH061068426 for identification and traceability. These indicators provide visual diagnostics of the device during operation. A manual reset button is located on the panel for reboot or recovery use.
The 5PC940 5737.027-00 industrial automation unit has expansion capabilities available via IF Option IFx and IF Option IF1 slots. These slots allow additional I/O or communication modules to be connected as needed. The power switch is located near the ETH1 port and functions as an On/Off selector. The unit is marked with CE and UL certifications and conforms to FCC Part 15 standards. It should only be handled using proper ESD precautions to protect internal components.
Frequently Asked Questions about 5PC94:0 5737.027-00:
Q: How does the IF Option slot in 5PC940 5737.027-00 support system expansion?
A: The IFx and IF1 slots let users connect additional I/O or communication interfaces. This modular approach ensures system scalability without hardware replacement.
Q: What is the function of dual MAC addresses in 5PC940 5737.027-00?
A: Separate MACs for ETH1 and ETH2 enable redundant networking or separation between control and machine communication. This enhances data security and network integrity.
Q: Why is hot-swapping the CFast card not recommended in 5PC940 5737.027-00?
A: Hot-swapping while powered risks data corruption or hardware damage. The unit lacks built-in hot-swap protection for the CFast slot.
Q: What kind of processor architecture is used in 5PC940 5737.027-00?
A: It uses an Intel-based processor to ensure consistent, high-performance logic handling. This architecture supports multitasking and real-time response.
Q: How does the manual reset switch aid in troubleshooting?
A: The switch enables soft reboots or forced resets during system faults. It provides a quick recovery mechanism without full shutdown.
