Product Description:

The 5PC901.TS77-10 is an industrial PC module manufactured by B & R Automation as part of the 5PC Industrial Automation Units series. It acts as the central processing and networking node in automated machinery, combining computing power, graphics output, and field connectivity so that control logic, data acquisition, and operator visualization run on one integrated platform. Installed inside a cabinet or panel, the unit interfaces directly with distributed I/O modules and motion drives used in discrete or continuous production lines.

At its core, the platform uses a Intel Celeron 1047UE processor built on a 22 nm architecture. This dual-core device provides 2 cores that operate at a base frequency of 1400 MHz, while a 2 MB Smart Cache is shared between threads to minimize memory latency. Two DDR3 memory channels are available for system RAM, and the board draws a nominal 5.5 A from a 24 VDC ±25% supply. DDR3 support simplifies sourcing of industrial-temperature modules and assures error-free transfers. The unit’s current draw and supply margin align with typical control-cabinet power budgets, letting designers power the PC directly from the machine’s low-voltage rail.

The chipset is the Intel HM76, which links the CPU to a maximum of 16 GB of system memory and sustains transfers up to 25.6 GB/s. Graphics are handled by the integrated Intel HD Graphics 2500 engine; it can clock to 900 MHz and drive DVI displays at a maximum resolution of 1920 × 1200 without an external card. For plant networks the integrated controller supports data throughput of 1 Gbit/s, enabling fast program downloads and real-time diagnostics. These interface and bandwidth figures ensure motion profiles, vision data, and operator screens reach the CPU and field devices with minimal delay.