5PC600.SE00-00 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5PC600.SE00-00 is part of the 5PC Industrial Automation Units series and has a nominal supply voltage of 24 VDC plus or minus 25 percent. It features 4 USB 2.0 interfaces, 2 RS232 serial interfaces, and 2 Type I Compactflash slots. This unit uses Renata 950 mAh lithium ion batteries, offers a protection rating of IP20, and cools passively with a heat sink.
Internal Product Review
The 5PC600.SE00-00 is a B & R Automation industrial automation unit with passive heat-sink cooling and IP20 protection. A Smart Display Link/DVI-I display interface and 1x ETH 10/100 networking support clean integration into machine control architectures. Four USB 2.0 ports and a 24 VDC ±25% supply make the unit a strong choice for stable automation platforms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5PC600.SE00-00 unit is an industrial PC manufactured by B & R Automation within the 5PC Industrial Automation Units series. It combines processor, fieldbus, and visualization resources in a single enclosure, allowing the unit to run control tasks, data logging, and operator interface software directly on the machine. By integrating these functions, the product reduces cabinet space and wiring while providing a deterministic platform for motion, safety, and process sequencing inside automated cells and production lines.
The controller accepts a supply voltage of 24 VDC ±25%, allowing operation from standard 24-volt control panels with generous tolerance for line variation. Under full load, it draws 3.8 A, a value used when sizing cabinet power feeds. An enclosure rating of IP20 limits installation to protected rooms free from water jets. For networking, it carries a single 10/100 Ethernet port, and external devices attach through four USB 2.0 ports. Legacy hardware connects via two RS-232 channels that support straightforward serial communication.
A passive heat sink handles thermal dissipation, so no fans are required. The housing depth measures 225.6 mm, which helps determine minimum enclosure depth during panel layout. System memory includes 512 kB of SRAM reserved for retentive process data, protected during power loss by an onboard Renata 950 mAh lithium-ion battery that matches the device’s low-leakage requirements. Two CompactFlash Type I slots provide removable program or recipe storage, and they are accessible from the front. Visualization is routed through a Smart Display Link/DVI-I interface, supporting remote panels over cable lengths without signal degradation. A hardware buffer of 10 ms bridges supply interruptions so PLC cycles can complete during brief brownouts.
