Product Description:

The 5MP7120.034F-000 is a handheld operator terminal from B&R Automation in the 5MP Mobile Panels series. It serves as a mobile human-machine interface that lets operators and machine setters enter parameters, view alarms, and run diagnostics beside the equipment. This arrangement is useful on machines where controls need to follow the operator from one access point to another. By combining a compact resistive-touch display, onboard processing resources, and standard communication ports, the panel can replace a fixed control station in many automation cells.

A 600 MHz clock drives the 32-bit ARM Cortex-A8 CPU, providing ample throughput for graphical pages and PLC data exchange. Working memory totals 128 MB LPDDR RAM, while applications and recipes are stored in 256 MB of flash. Typical draw stays near 6 W, so the panel can be powered from a 24 V DC source that may vary by ±25 percent. That hardware balance supports responsive screen changes and steady communication with the control system during routine operation. The Mini USB 2.0 OTG Type B interface supports connection of service peripherals, and the analog resistive touch layer keeps the screen operable when gloves or styluses are used.

The housing carries a protection rating of IP65, preventing dust ingress and water jets during washdowns. Visualization is handled by a 3.4 in TFT with 400 cd/m² brightness, a 700:1 contrast ratio, and a native resolution of 480 × 272 px, which helps maintain readability under ambient light. Network traffic flows through a shielded RJ45 connector at 10/100 Mbit/s, enabling recipe downloads and real-time diagnostics. Because the panel is handheld, clear visibility and sealed surfaces are important when it is used near moving equipment or in areas exposed to splashing liquids. The sealed enclosure, bright display, and Ethernet connection suit conveyor, packaging, and small-assembly pendants where space is limited and the interface must be moved with the operator.