5DLSD3.1001-00 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5DLSD3.1001-00 is part of the 5DL AP Link Modules series and has nominal voltage of 24 VDC SELV and nominal current up to 3 Amps. This module features galvanic isolation and offers 2 USB 2.0 Type A ports with a maximum current limit of 1 Amp each. It has a width of 190 mm, height of 110 mm, depth of 23.6 mm, and weighs 527 grams.
Internal Product Review
The 5DLSD3.1001-00 is a B&R Automation 5DL AP Link Module designed for stable 24 VDC ±25% operation with 3 A maximum nominal current. Galvanic isolation and a shielded RJ45 SDL3 input support clean integration in industrial communication layouts. USB 2.0 connectivity adds practical service access, making the module a well-executed link interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5DLSD3.1001-00 AP link module is produced by B&R Automation for the 5DL AP Link Modules series. It functions as a compact communication node that couples SDL3 field devices to a 24 VDC supply and to service interfaces such as USB, allowing controllers to monitor and power remote sensors, actuators, and safety equipment. By combining power distribution and network access in one housing, the unit reduces cabinet wiring and provides a consistent connection point for service access. Its compact format makes it suitable for installations where available rail space is limited but reliable field connectivity is still required.
The housing measures 23.6 mm deep, 110 mm high, and 190 mm wide, so it fits into shallow DIN-rail rows while still leaving space for cabling. A mass of 527 g adds stability on the rail without placing excessive load on light enclosures. The power section uses a SELV supply of 24 VDC, and the logic accepts an input range of 24 VDC ±25%, which helps the module remain operational during supply variation. Galvanic isolation separates field power from the internal electronics, and the assembly is rated for overvoltage category II for use in circuits downstream of building wiring. A shielded RJ45 socket carries the SDL3 infeed, which helps reduce EMC interference on high-speed safety traffic.
Field loads can draw up to 3 A through the integrated power rail, allowing several low-power devices to share one segment. The USB section includes 2 ports built to the USB 2.0 standard, and each port is current-limited to 1 A to protect the board during peripheral use. Because the module includes galvanic isolation and a shielded network connector, sensitive I/O lines are better protected from ground loops and conducted noise. These features support stable communication while also providing convenient access for removable storage or wireless adapters.
