5C5001.32/T B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 5C5001.32/T is part of the 5CS Provit Controller System Units series and features an Intel 440BX chipset with support for Intel Celeron and Pentium III CPUs. It includes an ATI Rage Mobility M graphics controller with 4 MB of memory and can support up to 512 MB of DRAM using two DIMM PC100 slots. The unit also comes with 10/100 Mbit/s Ethernet via an Intel 82551ER controller, two USB ports, and display interfaces for both FPD and CRT monitors.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5C5001.32/T modular computer board is manufactured by B & R Automation for the 5CS Provit Controller System Units series. Installed in a control cabinet, the board supplies processor, memory, display, and network resources that coordinate motion, safety, and HMI tasks within industrial automation cells. By combining PC architecture with dedicated fieldbus interfaces, it acts as the convergence point between higher-level supervisory software and real-time machine signals.
The board is powered by an Intel 440BX chipset that provides the PCI/ISA bridge and synchronous 100 MHz memory control. A single Socket 370 accepts embedded versions of Pentium-class processors, while the memory controller addresses up to 512 MB of SDRAM to buffer program code and process data. Network traffic is handled at 10/100 Mbit/s, allowing deterministic Ethernet segments for drive and I/O couplers. For local graphics, the module reserves 4 MB of frame buffer, and output is routed simultaneously to an FPD PanelLink channel and a 15-pin VGA CRT port. One E-IDE port supports an internal drive, and the chassis offers an external disk bay; there is no remote IDE interface, so long-cable storage must rely on standard buses.
Two memory sockets marked 2 × DIMM PC100 let modules be installed without violating timing margins set by the chipset. CPU compatibility extends to Intel Celeron and Pentium III devices, giving flexibility in clock speed and thermal budget. Video tasks are accelerated by the ATI Rage Mobility M controller, while deterministic LAN access is provided by the Intel 82551ER MAC-PHY. Peripheral expansion includes two USB 1.1 ports, two RS-232 serial ports, and a single parallel port. With one E-IDE header already occupied, these interfaces provide the board’s local connectivity.
Frequently Asked Questions about 5C5001.32/T:
Q: What chipset is featured in the 5C5001.32/T controller?
A: The 5C5001.32/T controller system includes an Intel 440BX chipset for system management and control.
Q: Which CPUs are supported by the 5C5001.32/T controller system?
A: This unit supports Intel Celeron and Pentium III processors via a Socket 370 interface.
Q: What is the maximum memory supported by the 5C5001.32/T and what slots are provided?
A: Two DIMM PC100 DRAM slots are available, supporting up to 512 MB of memory.
Q: What display interfaces are available on the 5C5001.32/T?
A: The 5C5001.32/T offers both FPD (Panellink) and CRT (15-pin VGA DSUB) display interfaces for multiple monitor types.
Q: What type of Ethernet connection does the 5C5001.32/T have?
A: An Intel 82551ER Ethernet controller enables 10/100 Mbit/s network connectivity for the system.
