5C5001.11 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 5C5001.11 unit is part of the 5CS Provit Controller System Units series and supports Intel Celeron and Pentium III CPUs on a Socket 370 with up to 512 MB DRAM. It features an Intel 440BX chipset, two USB ports, and display interfaces for both Panellink and 15-pin VGA. The device provides Ethernet via Intel 82559ER and RJ45, two serial RS232 ports, a parallel port that supports SPP, EPP, and ECP modes, and an external disk drive option.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5C5001.11 industrial PC card is produced by B&R Automation and belongs to the 5CS Provit Controller System Units series. Installed inside a control cabinet, this board supplies the computational resources that schedule machine sequences, coordinate fieldbus traffic, and support local operator panels. By combining standard PC architecture with dedicated industrial connectors, it runs motion logic, data logging, and HMI software that integrate multiple automation layers into one platform.
At the hardware level, the board centers on an Intel 440BX chipset; this northbridge-southbridge pair governs bus timing, cache support, and overall peripheral connectivity. A Socket 370 allows installation of Intel Celeron or Pentium III CPUs that match the platform’s thermal envelope. Three memory connectors, specified as 3 × DIMM PC100, accept synchronous DRAM and allow expansion up to 512 MB, so recipe files and trend buffers can be retained locally. For networked control cells, an Intel 82559ER Fast Ethernet controller on an RJ45 jack negotiates 10 or 100 Mbit/s links over shielded twisted-pair category 5 cable, enabling deterministic peer-to-peer messaging between drives, PLCs, and supervisory computers. An E-IDE slot hosts one internal storage device, while a front-panel connector accommodates an external disk drive for removable media.
Local visualization is handled by a Chips & Technologies 69000 graphics processor. It routes pixel data simultaneously to flat-panel digital lines and to analog monitors through the FPD (Panellink) + CRT (15-pin VGA DSUB) outputs. Frame-buffer depth is fixed at 2 MB, which is sufficient for 1024 × 768 HMI screens with 16-bit color. Two buffered RS-232 channels offer 16-byte FIFOs for barcode scanners, and the parallel interface supports SPP, EPP, ECP modes for printers or digital I/O expanders. Additional features include two front-panel USB ports and an external drive bay for quick recipe transfer by removable media.
Frequently Asked Questions about 5C5001.11:
Q: Which processors are compatible with the 5C5001.11 controller unit?
A: The 5C5001.11 supports Intel Celeron and Pentium III processors through its Socket 370 interface.
Q: What is the maximum supported RAM and memory slot configuration for the 5C5001.11?
A: This model can accommodate up to 512 MB of DRAM using 3 DIMM PC100 slots.
Q: Does the 5C5001.11 allow for external disk drive connections?
A: Yes, the 5C5001.11 includes an external disk drive option for additional storage access.
Q: What Ethernet capabilities and cabling does the 5C5001.11 offer?
A: The 5C5001.11 features an Intel 82559ER Ethernet interface with RJ45 TP, supporting 10/100 Mbit/s speeds over S/STP Category 5 cabling.
Q: Which video outputs and graphics controller are available on the 5C5001.11?
A: This unit provides FPD (Panellink) and CRT (15-pin VGA DSUB) display interfaces with 2 MB of graphics memory controlled by a Chips & Technologies 69000 VGA controller.
