5C5000.22 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 5C5000.22 is part of the 5CS Provit Controller System Units series. It supports a rated supply voltage of 24 VDC, with a maximum supply voltage of 30 VDC and a maximum total power of 60 W. The unit includes one B&R ISA slot, one half-size ISA/PCI slot, and features a PCI clock of 33 MHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5C5000.22 is a controller base unit produced by B & R Automation for the 5CS Provit Controller System Units series. Intended for cabinet mounting, the chassis delivers regulated back-plane power, watchdog monitoring, and expansion capacity for motion, I/O, and network modules so that diverse machine control tasks are centralized in a compact enclosure. Serving as the power entry and bus carrier, it lets integrators tailor CPU-less control nodes by plugging the required processing and field-bus cards directly into its internal backplane.
This power section accepts a rated input of 24 VDC, remains operational down to 18 VDC, and tolerates surges up to 30 VDC. Internally it can deliver a combined load of 60 W to peripheral cards. Separate switch-mode converters provide up to 10 A on the +5 V rail and 4 A on the +12 V rail, while negative supplies are limited to 1 A on −12 V and 0.3 A on −5 V. A bypass circuit keeps the +5 V bus alive for 1.5 ms at 150 W, giving CPU cards time to store states before shutdown. Maximum supply is introduced through reverse-polarity-protected circuits, and regulation is monitored so that any out-of-range voltage opens the internal watchdog to prevent data corruption.
The unit offers two expansion positions: one dedicated B & R ISA slot and one half-size ISA/PCI combination slot, bringing the total to 2 board locations. The shared PCI segment runs at a clock frequency of 33 MHz, and all edge connectors are keyed for the standard 5 V signal environment specified for this rack. Hold-up on the +12 V rail is guaranteed for 1 ms at 150 W, ensuring attached drives or relays stay energized during brief dips. Field power enters through a 5-pin DSUB connector that secures with thumbscrews for vibration-resistant service.
Frequently Asked Questions about 5C5000.22:
Q: What is the rated supply voltage requirement for the 5C5000.22 unit?
A: The 5C5000.22 provides a rated supply voltage of 24 VDC for its operations.
Q: What is the maximum +5 V current output of the 5C5000.22?
A: This unit delivers up to 10 A on the +5 V output, supporting devices that need high current at this voltage.
Q: How many expansion slots are available on the 5C5000.22 controller?
A: There are two expansion slots in total, including one B&R ISA slot and one half-size ISA/PCI slot.
Q: What is the PCI slot clock speed and voltage specification for the 5C5000.22?
A: The PCI slot in the 5C5000.22 operates at a clock speed of 33 MHz and uses a 5 V signal level.
Q: What type of supply connector does the 5C5000.22 use?
A: A 5-pin DSUB connector is used for the power supply connection on the 5C5000.22.
