5CFCRD.1024-06 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5CFCRD.1024-06 is a 1 GB compact flash card from the 5CF Compact Flash Cards series and uses SLC flash type. It features a maximum operating elevation of 4,572 meters and a guaranteed data volume of 100 TB. The card also supports SMART technology and static wear leveling and weighs 10 grams.
Internal Product Review
The 5CFCRD.1024-06 is a compact flash card built with SLC flash and 1 GB capacity. ECC support and static wear leveling give this card dependable memory management in demanding automation applications. A 100 TB guaranteed data volume makes this unit a strong choice for long-service industrial storage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5CFCRD.1024-06 is a removable CompactFlash module produced by B & R Automation in the 5CF Compact Flash Cards series. Installed in a machine controller or operator panel, the card supplies non-volatile mass storage for firmware, recipe data, and log files, allowing rapid replacement without reprogramming the base hardware. By following the CompactFlash electrical and mechanical format, the device integrates directly into B & R CPUs that rely on solid-state memory for deterministic boot behavior and vibration-tolerant data retention.
This model provides 1 GB of user-accessible space built on SLC NAND to maximize endurance. Host communication is handled through the multi-mode ATA interface supporting PIO 0-6; MWDMA 0-4; UDMA 0-4, so the host can use legacy or higher-speed bus timing without changing the hardware. Wear management uses static wear leveling, which relocates blocks as writes occur and reserves spare capacity for long-term integrity. Endurance is rated at 100,000 erase/write cycles per sector, which suits continuous logging tasks. The controller implements hardware error-correction coding and exposes SMART attributes, while the 3.3 ± 0.10 mm card height maintains compatibility with recessed slots on compact PLC bases.
Read stability is characterized by <1 error per 10^14 bits read, a bit-error rate low enough for mission-critical motion control or safety data archives. Across its service life, the flash array guarantees delivery of 100 TB of cumulative data before mandatory retirement, enabling long deployment cycles in batch or process plants. Operation is specified up to 4,572 m elevation, so cabinet installation on high-altitude sites does not require separate derating analysis. The card has a mass of 10 g, which helps minimize connector stress in mobile or vibration-exposed equipment.
