5CFCRD.0128-03 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 5CFCRD.0128-03 is a compact flash card by B & R Automation from the 5CF Compact Flash Cards series. It uses SLC NAND flash with a capacity of 128 MB and supports IDE/ATA interface. The card features typical read and write speeds of 8 MB/s and 6 MB/s, and has a data retention of 10 years with static wear leveling.
Internal Product Review
The 5CFCRD.0128-03 is a B & R Automation Compact Flash card built with SLC NAND and an IDE/ATA interface. Technical value is strong, with 128 MB capacity and data retention rated for 10 years. Static wear leveling supports dependable service life, highlighted by more than 2,000,000 erase/write cycles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The industrial memory module 5CFCRD.0128-03 belongs to the 5CF Compact Flash Cards series from B&R Automation. It is a removable CompactFlash card intended for PLCs, operator panels, and motion controllers that need non-volatile storage for firmware, recipes, and log files. Within such systems, the card supplies persistent mass memory without mechanical parts, enabling vibration-tolerant data preservation inside control cabinets and distributed I/O stations. Its removable format lets compatible hardware use the card directly as onboard storage without adding a separate mechanical drive. This format is useful where compact control hardware needs local storage in a standardized card slot.
This model carries a storage capacity of 128 MB and uses SLC NAND cells, so each bit is stored in a single-level charge state that favors endurance and deterministic access times. Host devices communicate over the IDE/ATA interface and may address the card through PIO modes 0 to 4 or multi-word DMA modes 0 to 2. Typical sequential transfers reach 8 MB/s when reading, while burst writes average 6 MB/s because of internal program-and-erase timing. Static wear leveling distributes erase activity across all blocks to keep program times predictable throughout the product's life. Because the interface follows ATA conventions, compatible controllers can treat the card as standard block storage for operating files and archived process data.
For reliability, the controller employs BCH-based ECC, limiting uncorrectable bit failures to <1 error per 1014 bits read. Retained data is specified for a minimum of 10 years at reference conditions, supporting long-term machine documentation storage and records that must remain available after extended idle periods. Operation is allowed from a cold-start temperature of 0 °C up to an ambient temperature of 70 °C, so the card can remain inside sealed automation enclosures that experience elevated panel temperatures. The card supports more than 2,000,000 erase/write cycles per block, which suits high-frequency log file updates in predictive maintenance or traceability applications. Error statistics are available through ATA log pages, but no S.M.A.R.T. attribute set is implemented.
