Product Description:

The 5AP1130.185C-000 is a human-machine interface panel produced by B&R Automation and assigned to the 5AP Single Touch Automation Panels series. As an operator terminal, it combines a widescreen display with single-touch input, allowing machine builders to visualize process states and issue commands from one sealed front surface in production cells, conveyors, or batch systems. It is intended for front-of-machine operation where display clarity and direct touch input are needed in the same device.

Its panel uses an 18.5-inch diagonal TFT color display that renders graphics at 1920 × 1080 pixels, so vector images and small text remain sharp during normal operation. The widescreen format is maintained by a 16:9 aspect ratio, giving control layouts more horizontal space for trend plots or alarm lists. Color depth reaches 16.7 million colors, which helps reduce visible banding in gradients and makes status indicators easier to distinguish. A contrast ratio of 1000:1 keeps foreground symbols readable against shaded backgrounds under factory lighting. Projected capacitive touch technology registers input through a single glass sheet, offering accurate touch detection even when operators wear thin gloves. An LED backlight supports uniform brightness and long service life, while horizontal and vertical viewing angles of 85° in both directions keep screen content legible when the panel is mounted above or below eye level.

The aluminum front is sealed to IP65, blocking dust and washdown jets so the panel can be installed on door panels of food, chemical, or packaging equipment. Mechanical width is 475 mm and height is 295 mm, allowing integration into standard 19-inch cabinet cutouts with minimal bezel overhang. Mass is limited to 4700 g, so a hinged swing arm or light gantry can support the unit without excessive structural load. Depth is compatible with typical enclosure clearances, and the slim profile keeps internal wiring accessible after installation.