Product Description:

The 5AP1120.1505-000 is a single-touch operator panel produced by B & R Automation within the 5AP Single Touch Automation Panels series. Acting as the local human-machine interface, it lets operators issue commands and observe system states through a resistive touch layer and color display. Deployed on door fronts or control stations, the panel ties directly into the automation controller, removing the need for a separate workstation. This gives operators immediate access to visualization and acknowledgment functions while the machine is running or being serviced.

For environmental endurance, the front surface carries a protection grade of IP65, which blocks dust and low-pressure spray, while the rear housing is rated IP20 for shielded cabinet mounting. The visualization area spans 15.0 in on a TFT color screen that renders at 1024 x 768 pixels. Graphics are distinguished by a contrast ratio of 700:1, which helps separate foreground data from background elements. An LED backlight provides uniform illumination across the display, and the analog resistive touch interface accepts fingertip, gloved, or stylus input without recalibration. A vertical viewing window of 70° helps maintain readability when the display is installed above eye level.

The enclosure width is 435 mm and the height is 330 mm, which helps keep panel cutouts manageable. The unit mass of 5000 g supports hinge or arm selection without adding unnecessary bulk to the mounting arrangement. Peripheral access is available through a USB 2.0 port that can source up to 500 mA, allowing a flash drive or handheld scanner to be connected for data transfer and diagnostics. A horizontal viewing angle of 80° lets multiple users monitor the screen from lateral positions during changeovers or shift checks. This helps the display remain readable when more than one person needs to view the same operating page.