Product Description:

The 5AP1120.1214-000 operator panel is produced by B&R Automation as part of the 5AP Single Touch Automation Panels series. It combines a color LCD with a single-touch surface to serve as the local human-machine interface for packaging, material-handling, and motion systems. The device brings visualization, parameter entry, and acknowledgment functions into a front-mountable enclosure that connects directly to a controller or industrial PC through standard cabling. Its panel format fits cabinets where depth is limited and an external keyboard would be impractical.

The display measures 12.1 in, providing a practical viewing area without occupying a large cabinet surface. Its native resolution of 800 x 600 pixels supports standard SCADA graphics while keeping the processor load low. A contrast ratio of 1500:1 provides clear differentiation between foreground objects and the background under bright shop lighting. Illumination comes from an LED backlight rated for 50,000 hours, reducing replacement intervals compared with CCFL lamps. Touch input relies on an analog resistive sensor that recognizes presses made with a finger, gloved hand, or stylus and tolerates contaminants on the overlay. Optical transmission through the display stack is 81% ± 3%, so most of the emitted light reaches the operator while preserving color saturation.

The front of the panel has IP65 protection, allowing installation in washdown areas when the rear is properly sealed. The naturally anodized aluminum frame measures 362 mm wide and 284 mm high, while the unit weighs 3200 g, which makes it easier to handle during installation or service. Image integrity is maintained by horizontal and vertical viewing angles of 89°, so status indicators remain legible when the operator stands to the side of or below the machine window. A rear USB 2.0 Type-A port supplies up to 500 mA for data-logging drives or service dongles without requiring an external hub.