Product Description:

The 5AP1120.101E-F05 is an operator interface designed by B&R Automation as part of the 5AP Single Touch Automation Panels series. It combines a color display with a resistive single-touch surface so machine builders can present status data and accept commands in compact control stations. The housing and connector layout allow the unit to mount on enclosures or swing arms where space constraints and washdown requirements are common.

The visualization hardware includes a 10.1 in active area that uses a TFT color liquid-crystal stack. Graphics are rendered at 1280 x 800 pixels, and the controller drives a palette of 16.7 million colors so alarms and trends can be distinguished without dithering. A sheet-metal front frame carries an IP65 rating, meaning the front surface resists dust ingress and low-pressure water jets during production cleanup. Behind the bezel, an LED backlight illuminates the panel while maintaining uniform brightness. The LED source is paired with a resistive sensor layer that registers one touch point at a time, making the unit suitable for gloved operation on filling lines or conveyor stations.

Additional characteristics support integration inside sealed cabinets. The back of the device is protected to IP20, and the LED source offers an expected service life of 50,000 h before luminance falls below its stated limit. Touch coordinates are digitized through a 12-bit serial controller that works with the analog resistive sensor to provide consistent cursor resolution across the screen. An anti-glare polyester overlay provides scratch resistance while passing 81% ±3% of the incident light to the pixels. The cast-aluminum frame measures 279 mm in width and 191 mm in height, and the assembly weighs 1900 g, permitting VESA or panel mounting without additional reinforcement.