5AP1120.0702-F04 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5AP1120.0702-F04 is part of the 5AP Single Touch Automation Panels series and features a 7-inch TFT color display with a resolution of 800 x 480 and a 16.7 million color depth. This panel has an LED backlight, analog resistive touch technology with a 12-bit serial controller, and front protection rated at IP65.
Internal Product Review
The 5AP1120.0702-F04 is a B & R Automation single-touch automation panel with a TFT color display and analog resistive touch technology. The 800 x 480 resolution and 16.7 million-color depth support clear process visualization and dependable operator readability. IP65 front protection is a strong advantage for industrial panel applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5AP1120.0702-F04 is a human-machine interface manufactured by B & R Automation and supplied as part of the 5AP Single Touch Automation Panels series. It serves as an operator terminal that presents machine status data and accepts touch input for commands in industrial automation cells, packaging lines, and process skids. The unit combines a compact 7-inch display with an analog resistive touch layer, allowing controllers to present graphics while users interact through a single sealed front surface.
The visual section uses a TFT color panel that supports a palette of 16.7 million colors, allowing drive diagnostics, alarm codes, and trending graphs to be differentiated by hue without dithering. Image sharpness is supported by an 800 × 480 pixel matrix; this WVGA resolution yields a pixel density that keeps small text legible at typical control-cabinet viewing distances. The LED backlight provides a contrast ratio of 550:1, so on-screen objects remain distinguishable in bright factory lighting. The diagonal screen size is 7.0 inches, balancing usable screen area with limited panel-door space. Horizontal viewing limits are 70° to the left and 70° to the right, while vertical angles span 50° upward and 60° downward. These optical boundaries allow operators to read the display without repositioning equipment racks. The serial 12-bit touch controller scans the resistive sheet for coordinate pairs, providing a raw resolution of 4096 × 4096 for accurate button selection.
The tempered front foil has an ingress protection rating of IP65 against dust and low-pressure water jets, whereas the rear housing is rated IP20 because it is mounted inside an enclosure. The panel has a height of 156 mm and a width of 212 mm, allowing installation in compact cabinet doors with sufficient room for gasket compression. The analog resistive touch technology accepts input from a gloved hand or stylus without requiring capacitive coupling. LED backlighting provides consistent illumination across the specified viewing angles and supports clear presentation of operating data.
