5ACCMA00.0001-000 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 5ACCMA00.0001-000 is part of the 5AC CNC Addon Modules series. It features an aluminum coated housing with IP65 ingress protection, measures 280 mm wide by 259 mm high, and weighs 2500 grams. This module supports a single USB 2.0 type A interface with a current capacity of 500 mA and mounts via a swing arm with flange.
Internal Product Review
The 5ACCMA00.0001-000 is a B & R Automation CNC addon module with a coated aluminum housing and IP65 protection. Technical value stands out through a USB 2.0 Type A interface that supports dependable peripheral connectivity in machine environments. Swing-arm mounting with flange supports clean operator-station integration, making the module a strong fit for demanding CNC installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5ACCMA00.0001-000 is an accessory module produced by B&R Automation and assigned to the 5AC CNC Addon Modules series. It extends operator panels on machining centers with a protected USB interface, allowing quick data exchange or service uploads without opening the main cabinet. This arrangement is useful where removable media must be connected from the front of the machine while internal electronics remain enclosed. Positioned at the swing-arm flange, the unit keeps the connector close to the user while maintaining the enclosure integrity required in automated manufacturing environments.
The module has a depth of 96 mm, a width of 280 mm, and a height of 259 mm. These dimensions fit inside the clearance normally left behind protective front plates on arm-mounted control boxes. The housing is made of coated aluminum, which helps dissipate heat, resist surface corrosion, and provide a rigid base for the interface opening. With a mass of 2500 g, the module adds a moderate load to articulated brackets, so counterbalance springs on the arm seldom need recalibration. The housing is rated IP65, which seals the connector area against dust ingress and low-pressure water jets and allows washdown around CNC tooling without removing the assembly.
A dedicated swing-arm mounting flange places the module where portable media can be reached easily while preserving cable slack during arm rotation. The single USB port follows USB 2.0, accepts a Type A plug, and can supply up to 500 mA for peripheral devices such as flash drives or barcode scanners. Because only one port is provided, the USB host controller can use a fixed address, which simplifies part-program transfers and avoids enumeration conflicts on multi-port panels. This also keeps the access point predictable when the panel is used for routine machine data handling.
