5A5009.01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
MPN: .
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
22 Seconds
The 5A5009.01 is a hard disk produced by B & R Automation and is part of the 5A5 Hard Disks series. It functions as a primary slave device for the first IDE controller and includes a CD-ROM optical drive with a read speed of 24x. The hard disk has a peak power draw of 7 watts and allows a maximum mount angle of 25 degrees.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 5A5009.01 is a hard-disk assembly manufactured by B & R Automation within the 5A5 Hard Disks series. As a storage device for B & R controllers, it provides nonvolatile space for recipe data, diagnostic logs, and boot images inside the control cabinet. By combining a magnetic disk with an IDE interface, the unit supports automation tasks that depend on consistent access to local files instead of remote servers. This arrangement keeps programs and parameter sets available at the machine during normal operation. It is suited to control platforms that rely on onboard storage for routine startup and data retention.
During sequential reads the unit draws an average of 4 W, so its contribution to overall cabinet heat remains low. When installed in an Automation PC, the housing depth increases by 16 mm, which should be considered in shallow enclosures. The embedded bus link uses the First IDE Controller, and within that channel the drive is set as a Primary Slave to avoid conflicts with a master device such as a flash module. This channel assignment keeps the storage layout orderly in systems that use more than one IDE device. Correct orientation is maintained up to a mounting angle of 25°, which is useful in control panels that are tilted for operator access.
Mechanical fastening uses 4 mounting screws, which help maintain clamping force under vibration. The drive can work with an integrated CD-ROM reader, and that optical path supports a read rate of 24x for local media access when network connectivity is limited. Momentary current surges raise consumption to 7 W at spin-up, while standby demand drops to 0.1 W. The difference between startup and idle demand is useful when estimating supply loading over different operating states. Local hard-disk and optical access can also simplify file retrieval during service or recovery tasks.
Frequently Asked Questions about 5A5009.01:
Q: What type of optical drive is included with the 5A5009.01 hard disk?
A: The 5A5009.01 hard disk is equipped with a CD-ROM optical drive for reading discs.
Q: What is the read speed of the 5A5009.01’s optical drive?
A: This model supports a read speed of 24x for CD-ROM media.
Q: What IDE device role does the 5A5009.01 serve?
A: The 5A5009.01 functions as a primary slave device on the first IDE controller, allowing integration into standard IDE configurations.
Q: What is the peak power consumption for the 5A5009.01 hard disk?
A: Seven watts is the peak power consumption of this hard disk model during operation.
Q: What is the maximum mount angle for the 5A5009.01 hard disk?
A: This hard disk can be safely mounted at an angle of up to 25 degrees from horizontal.
