4XP0000.00-K43 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 4XP0000.00-K43 is part of the 4XP Keypad Modules series and features six round illuminated ring keys with a color layout of red, yellow, green, blue, and white. The keypad module offers IP65 front protection, an 8-pin male multipoint connector, and emergency stop contacts with two normally closed contacts. It consumes 240 mA at 24 VDC and measures 170 mm in width, 80 mm in height, and 32 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4XP0000.00-K43 keypad module is produced by B & R Automation within the 4XP Keypad Modules series. It serves as an operator input station, presenting illuminated pushbuttons and an integrated emergency-stop device for direct machine control in distributed systems. As an X2X slave, it exchanges status and command data with a primary CPU over a single cable, allowing decentralized installation on the machine frame. Its compact panel format minimizes enclosure space while still providing tactile confirmation through ring-lit keys.
The module is fed with 24 VDC and draws only 240 mA in steady-state operation, a level suitable for Class 2 power supplies. At power-up, inrush current can momentarily rise to 20 A for <1 ms, so fuse and relay sizing must account for that brief demand. A station spacing of up to 100 m permits mounting far from the control cabinet without repeaters. User interaction is handled by 6 round illuminated ring keys, and the color layout of 2 R/Y/G/W, 3 R/Y/G, and 1 R/Y/G/B supports clear status indication. The front aluminum bezel secures to the machine door and carries a protection rating of IP65, which supports washdown cleaning. All terminations are routed through an 8-pin male multipoint connector at the rear, and the housing measures 170 mm wide by 80 mm high, giving a shallow profile for crowded panels.
The rear housing depth is only 32 mm, so clearance behind the mounting surface is minimal, and the total mass of 430 g reduces load on light-gauge doors. Back-side protection is rated IP20, which is acceptable inside a closed enclosure, while the front carries the Rafix 22FS+ 1.30.273.511/0300 emergency-stop button. Two redundant switching paths are provided by two normally closed contacts, allowing integration into safety-rated stop circuits. The multicolor ring layout of the keys removes the need for external pilot lamps, and the slim enclosure helps prevent interference with adjacent devices on the panel.
Frequently Asked Questions about 4XP0000.00-K43:
Q: What interface type does the 4XP0000.00-K43 keypad module use?
A: The 4XP0000.00-K43 module uses a X2X slave interface for system connectivity.
Q: What is the front protection rating of the 4XP0000.00-K43 keypad module?
A: This module features front protection rated at IP65 for resistance to dust and water spray.
Q: How many keys are present on the 4XP0000.00-K43 module?
A: There are 6 round illuminated ring keys included on this keypad module.
Q: What type of emergency stop contacts does the 4XP0000.00-K43 module provide?
A: The emergency stop on this module uses a Rafix 22FS+, 1.30.273.511/0300 type with 2 normally closed contacts.
Q: What is the required supply voltage for the 4XP0000.00-K43 keypad module?
A: The supply voltage requirement for this module is 24 VDC.
