4PP280.1505-B5 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 4PP280.1505-B5 is part of the 4PP Power Panels series and features a 15 inch display with a resolution of 1024 x 768 pixels and a brightness of 330 cd/m². It is powered by a Geode SC2200 266 MHz processor, includes 64 MB DRAM, 2 MB flash memory, and supports two APCI slots along with a CompactFlash Type I slot. The front panel offers IP65 protection, operates at 24 VDC ±25%, and uses analog resistive touch technology.
Internal Product Review
The 4PP280.1505-B5 is a B & R Automation power panel with 1024 x 768 display resolution and analog resistive touch technology. IP65 front protection and 24 VDC rated operation make this unit a very dependable choice for industrial machine interfaces. The Geode SC2200 266 MHz processor and 64 MB DRAM support solid performance for established control applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4PP280.1505-B5 is a Power Panel produced by B&R Automation within the 4PP Power Panels series. It integrates an operator display, resistive touch input, and a 266 MHz Geode SC2200 processor so the unit can run visualization tasks and local logic without an external PC. Mounted on the machine front, it supplies the graphical interface that operators use to start cycles, adjust parameters, and observe status in real time, streamlining the control architecture for industrial equipment.
The panel features a 15 inch TFT with a native resolution of 1024 x 768 pixels, and this pixel density allows detailed process graphics to be rendered clearly at typical viewing distances. Screen legibility on the factory floor is supported by luminance of 330 cd/m² and a contrast ratio of 300:1, while analog-resistive touch technology permits gloved operation. The aluminum bezel carries front sealing rated at IP65, protecting the electronics against dust and directed water jets. Internally, the system holds 64 MB of DRAM that buffers the operating system and runtime application, and two APCI slots accept fieldbus or I/O cards to tailor communication. A CompactFlash Type I slot is provided for recipe storage and removable data handling, and the start-up inrush of 20 A lasts less than one millisecond, minimizing supply disturbance.
Non-volatile program data resides in 2 MB of on-board flash, and additional storage can be added through the external memory slot. Network integration is handled by the Ethernet interface running at 10/100 Mbps, while a serial port offers 115 kBaud transfer rates for legacy devices. The unit operates from a single-ended supply of 24 VDC ±25%, which provides broad input tolerance for cabinet power distribution. Maximum consumption is limited to 40 W, so the panel can share low-current power supplies with other control modules without exceeding thermal limits.
