4PP251.0571-A5

    In-Stock, Ships 1-2 Days

Preparing your secure checkout page...

The 4PP251.0571-A5 features a Geode SC2200 266MHz processor, 64 MB of DRAM, a 5.7-inch color LCD display with QVGA resolution, and two USB 1.1 ports. Part of the 4PP Series from B & R Automation, it provides IP65 front protection, RJ45 Ethernet connectivity of 10/100 Mbps, and weighs approximately 2.7 kilograms.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The 4PP251.0571-A5 is a power panel from the Power Panel 200 series of devices produced by the B & R Automation company. It is a power panel with automation runtime that features a Geode SC2200 processor and graphics controller. The 32-bit processor uses the x86 instruction set and supports the MMX technology and streaming SIMD extension expanded command sets. The chip has 16 kilobytes of L1 cache and is cooled by a passive heat sink. The device has 64 megabytes of DRAM memory, as well as 256 kilobytes of SRAM and 2 megabytes of flash memory for the firmware.

The 4PP251.0571-A5 has a color LCD display that can display up to 256 colors. It has a diagonal length of 5.7 inches and a QVGA resolution of 320 x 240 pixels. It has a horizontal viewing angle of 40 degrees and vertical viewing angles of 40 degrees and 50 degrees on the up and down directions, respectively. The filter glass on the unit has a 95 percent degree of transmission and is coated on both sides. There are 16 LED-equipped function keys on the unit and 6 soft keys. The unit also features a number block with 15 keys and 5 other keys. The power supply on the unit has a rated voltage of 24 VDC and a maximum starting current of 20 A for < 1 ms.

The 4PP251.0571-A5 has an aluminum frame with a polyester membrane and a flat gasket around the display front. It has a weight of 2.7 kilograms with no aPCI module attached. The unit is rated for proper functioning within an ambient temperature range of 0 to 50 degrees Celsius. The front side of the unit has an IP65 protection rating.

Boot Loader / Operating System
Automation Runtime
Compactflash
Type I, 1 slot
Dimensions (wxhxd)
212 mm x 245 mm x 98 mm
Display
5.7 in color LCD, QVGA (320 x 240), 256 colors
Dram
64 MB
Ethernet
MacPhyter DP83816, 10/100 Mbps, RJ45
Flash Memory
2 MB (for firmware)
Graphics Controller
Geode SC2200
Housing
Metal, IP65 front protection
Power Supply
24 VDC ~25%
Processor Type
Geode SC2200 266MHz, 32-bit x86
Serial Interface Com
RS232, max. 115 kBaud, 9-pin DSUB
Sram
256 KB
Usb Interface
USB 1.1, 2 ports, max. 500 mA per port
Weight
Approx. 2.7 kg

Frequently Asked Questions about 4PP251.0571-A5:

Q: What operating system does the 4PP251.0571-A5 power panel use?

A: It runs the Automation Runtime software from B & R

Q: What kind of processor does the 4PP251.0571-A5 have?

A: It has a Geode SC2200 processor

Q: What is the resolution of the display on the 4PP251.0571-A5 device?

A: It has a display resolution of 320 x 240 pixels

Q: What is the rated voltage of the 4PP251.0571-A5?

A: It has a rated voltage of 24 VDC

Q: What product group does the 4PP251.0571-A5 belong to?

A: It is part of the Power Panel 200 series of devices


Internal Product Review

  • ‘‘The 4PP251.0571-A5 Power Panel from B & R Automation is a passively cooled device with a solid build and can be used in a variety of applications.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo