4PP182.1043-31 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 4PP182.1043-31 is part of the 4PP Power Panels series and features a 10.4 inch analog resistive touch display with a resolution of 640 x 480 and brightness of 350 cd/m². Powered by a Geode SC2200 266MHz processor, it offers 64 MB DRAM, 2 MB flash memory, and supports connectivity with RS232, two USB ports, and 10/100 Mbps Ethernet. The panel is rated at 24 VDC ±25%, features IP65 front protection, and has maximum power consumption of 23 watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4PP182.1043-31 operator panel is part of the 4PP Power Panels series produced by B&R Automation. Combining visualization, touch input, field communication, and onboard control logic, the unit acts as a compact HMI-PLC for industrial machinery and production cells. Its purpose is to present process data to operators, accept commands through the front display, and run local application code that coordinates drives, sensors, and actuators over Ethernet or serial links.
The panel uses a 10.4-inch TFT display operating at 640 x 480 pixels, and brightness reaches 350 cd/m² so graphics remain legible under workshop lighting. An analog resistive touchscreen overlays the panel front, enabling gloved interaction while preserving the IP65 seal against dust and low-pressure water jets when mounted flush. Networking is provided by a 10/100 Mbps Ethernet controller for programming or SCADA links, and a dedicated RS232 port exchanges data with legacy devices at up to 115 kBaud. Two USB host ports accommodate service peripherals, and a single Type I CompactFlash slot accepts removable media for recipe transfer or system backup. Permanent mass storage is supplemented by 2 MB of internal flash.
Computing resources center on a Geode SC2200 266 MHz 32-bit x86 processor that runs the automation runtime. The CPU works with 64 MB of SDRAM so user tasks, fieldbus drivers, and visualization objects can execute concurrently without swapping. Maximum power draw is 23 W, allowing fanless enclosure designs, provided the supply delivers 24 VDC ±25% within Class 2 limits. Overall dimensions of 423 × 288 × 65.5 mm help retrofits into existing machine doors. Passive convection across the aluminum rear housing removes waste heat, and watchdog circuitry on the RS232 line helps maintain communications during line faults.
