4PP120.1043-31
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 4PP120.1043-31 from B & R Automation belongs to the 4PP Series and features a Geode SC2200 266MHz, 32-bit x86 processor. It has 64 MB of DRAM, a 10.4-inch color TFT display with VGA resolution, and 2 MB shared graphics memory. The device's protection type is IP20 on the back and IP65/NEMA 250 type 4X on the front.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4PP120.1043-31 is an advanced power panel derived from the 4PP series by B&R that offers several ports and communication interfaces. Unlike earlier versions of B&R's power panels, the 4PP120.1043-31 features a powerful Geode SC2200 32-bit x86 system processor that runs at 266 MHz. This processor dedicates 16 kB for cache, allows floating point units, and facilitates passive cooling via a built-in heat sink. The processor itself is also responsible for controlling the 4PP120.1043-31's built-in graphics during operation. The 4PP120.1043-31 offers 64 MB of DRAM and 2 MB of shared graphics memory. Aside from these features, the 4PP120.1043-31 supports numerous communication interfaces, ports, and slots.
Most of the communication interfaces, peripherals, and ports for the 4PP120.1043-31 are found on the rear side. The 4PP120.1043-31 requires a power supply with a nominal voltage of 24 V DC. The rear side of the power panel contains the reset button, USB port, COM interface, Ethernet interface, status LEDs, and CompactFlash slot. The Ethernet interface uses a MacPhyter DP83816 controller and facilitates a transfer speed of 10/100 Mbps. The serial interface COM supports the RS232 communication protocol and facilitates connection via a 9-pin DSUB. The two USB 1.1 interfaces can transfer files up to a maximum rate of 1.5 Mbit/s at low speed and 12 Mbit/s at full speed.
The 4PP120.1043-31's color TFT display has 256 colors and a contrast of 600:1. The display has a diagonal measurement of 10.4- inches (264 mm) at VGA (640 x 480 pixels) resolution. The screen employs analog resistive touch technology with a degree of transmission of 78%. The 4PP120.1043-31 has a metal casing, which contributes to its relatively larger weight of 3.7 kilograms. The front casing of the 4PP120.1043-31 has a degree of protection of IP65.
Frequently Asked Questions about 4PP120.1043-31:
Q: What viewing angles are most appropriate for the 4PP120.1043-31?
A: The appropriate viewing angles for the 4PP120.1043-31 are classified into two categories: vertical and horizontal. For the vertical orientation, the appropriate viewing angles are 45 degrees (direction U) and 55 degrees (direction D). Meanwhile, for the horizontal orientation, the appropriate viewing angle is 70 degrees.
Q: What is the back-light service light for the 4PP120.1043-31?
A: Assuming half-brightness, the 4PP120.1043-31's backlight service life is around 55,000 hours.
Q: How bright is the 4PP120.1043-31's backlight?
A: The 4PP120.1043-31's backlight has a rated brightness of 350 candela per square meter.
Q: How much power does the 4PP120.1043-31 consume?
A: The 4PP120.1043-31 typically consumes 15 watts. However, in high-demand applications, the 4PP120.1043-31 may consume a maximum power of 20 watts.
Q: What are the dimensions of the 4PP120.1043-31?
A: The 4PP120.1043-31 has the following measurements: 323 mm (width), 260 mm (height), and 65.5 mm (depth).
