4C1300.01-510 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 4C1300.01-510 is a control panel from the 4C PanelWare Panels series produced by B & R Automation. It features a uPD70325 NEC V25 processor operating at a 16 MHz clock speed, and has a single electrically isolated CAN port with a maximum rate of 500 kbit/s. The panel uses a 24 VDC supply, with current consumption measured at 95 mA, and its dimensions are 182 mm in width, 86 mm in height, and 30 mm in depth.
Internal Product Review
The 4C1300.01-510 is a B & R Automation PanelWare panel with a 16 MHz CPU and 24 VDC supply. Electrically isolated CAN communication and a 500 kbit/s maximum CAN rate support dependable network integration, making the unit a strong fit for machine-interface applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 4C1300.01-510 is an operator-panel controller manufactured by B&R Automation and assigned to the 4C PanelWare Panels series. Within an industrial automation cell, it functions as a CAN bus endpoint that accepts text-based commands from supervisory equipment and drives simple display or keypad hardware. By embedding control logic close to the machine, the device reduces field wiring and allows decentralized parameter entry, alarm acknowledgment, and status reporting.
The communication layer is provided by a single CAN channel that emerges on a 9-pin male D-Sub connector; the transceiver is electrically isolated, which helps prevent ground loops between this panel and other bus participants. Data exchange can be scheduled at up to 500 kbit/s, giving adequate bandwidth for parameter changes and diagnostics. Command interpretation follows the VT100 command set with CAN extensions, and node identity is set by small rotary switches on the housing. The board is driven by a uPD70325 (NEC V25) microcontroller that clocks at 16 MHz, and typical runtime current is 95 mA at 24 VDC. Only one CAN port is installed, so any network routing must be handled externally.
Physical integration is simplified by the slim profile: depth is only 30 mm, height is 86 mm, and front width is 182 mm, allowing the panel to fit inside shallow enclosures or door skins. The aluminum housing carries a black coating that provides a uniform appearance with other PanelWare components and offers basic surface protection. Power is supplied at 24 VDC, matching the standard control-cabinet rail voltage, and internal regulation handles the logic rails while maintaining the specified isolation for the CAN circuitry. Because the node switches are on the front edge, address selection can be changed without removing wiring during setup.
