Product Description:

The 4C1000.01-510 is an operator interface panel in the 4C PanelWare Panels series manufactured by B&R Automation. Designed for cabinet-door installation, the unit provides a compact human-machine link that lets operators issue commands, review process data, and perform setup tasks through its integrated keypad and single-line display. Communication to the host controller is handled by an RS232 link, making the panel suitable for retrofit or new installations that already support serial devices.

During normal operation the panel draws only 65 mA, keeping heat dissipation low and allowing multiple units to share a single power rail. It accepts a nominal input of 24 VDC through four dedicated supply pins, so it can be wired directly to the standard 24-volt bus found in most control cabinets. Mechanical integration is straightforward because the front bezel measures 182 mm in width, 86 mm in height, and 30 mm in depth, permitting shallow mounting without obstructing interior components. Data exchange takes place over an RS232 port that terminates on a 9-pin male D-sub connector, and because the interface is not electrically isolated, the panel must share ground with the connected PLC or drive.

The user interface follows the VT100 Command Set, allowing the controller to send familiar cursor-positioning and screen-refresh commands without additional libraries. Visual feedback is provided by one display module, while operator input is captured through 7 keypad modules that can be custom-labeled for machine functions. An auxiliary RS232 header can supply 5 V at 150 mA to small external devices, eliminating the need for a separate power source. The assembly tolerates mechanical shocks up to 15 g and continuous vibration with an amplitude of 0.075 mm, ensuring stable operation on mobile frames or presses that generate high dynamic loads.