The AL2018-0000-0000 is a linear servomotor manufactured by Beckhoff. The servo motor features both a coil unit and a magnet plate. It comes with grooved laminated core with an inlaid copper winding. The AL2018-0000-0000 serves as a moving part and its magnet plate contains steel plate where the permanent magnets are fixed. The unit comes with a low thermal resistance allowing a high repeatability. The unit features a direct force with little latching force.
The three-phase synchronous linear servomotor features peak force of 1350 N while the peak current is 19.6 A. The unit features N/S winding type while the maximum speed is 3.5 m/s. The unit features magnet pitch of 24 Millimeters with magnetic attraction of 2450 N. The unit features a rated voltage of 400 to 480 Volts AC while the continuous force with air cooling is rated as 200 N. The continuous current with air cooling is rated as 214 A (N).
When it comes to components installation, the manufacturer recommends that the AL2018-0000-0000 should be handled by qualified personnel. For smooth operation, the unit should be properly earthed. Further, the cables should be meet the standards as set by the manufacturer. When routing the cables, ensure adequate cross-sectional area as per the EN 60204 standards. To ensure a safer and flawless installation, the manufacturer provides preassembled linear motors and feedback cables. The minimum bending radius for each cable is to be taken from the corresponding data sheets, and the manufacturer. Note that incorrectly installed shielding will lead to EMC interference. Get this motor from Wake Industrial with a one-year warranty.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved