The AL2015-0000-0001 is a three phase synchronous linear servomotor manufactured by Beckhoff. Classified under the AL2015 series, the AL2015-0000-0001 features a coil unit and has a magnet plate. The coil unit comes with a grooved, laminated core with an inlaid copper winding. The unit features peak forces of 225 N to 1,800 N. The AL2015-0000-0001 features IP 64 protection and is suitable for use in an inclement environments. The coil units are fitted with a 0.5 m cable bundle with optionally pre-assembled connectors. The AL2015-0000-0001 comes with an extremely precise positioning and a high degree of repeatability.
The manufacturer recommended that experienced technical staff carry out installation and repair work. The technical staff should have knowledge of the drive technology and the electrical systems. Further, protective earth systems must be connected when installing the electrical systems and different components. When transporting the AL2015-0000-0001 ensure adequate protection from high mechanical stress or large temperature fluctuations. The linear motor should be stored outdoors and the storage space should be adequately ventilated and dry. The ambient storage temperature is -25 degrees Celsius to 55 degrees Celsius. The relative humidity is 95% none condensing.
The AL2015-0000-0001 comes with permanent magnets in the magnetic plate. The unit is built to ensure proper functioning and compliance with the statutory regulations including the EMC and the UL regulations. The three phase linear motor comes with a voltage rating within the range of 400 to 480 Volts AC. The magnetic pitch is 24 Millimeters while the air gap is rated as 0.5 Millimeters. Get this motor from Wake Industrial with a one-year warranty.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved