Classified under the AL2018 series, the AL2018-0000-0001 is a three phase synchronous linear servomotor. The linear servomotor features a coil unit with a magnet plate and contains a grooved laminated core with an inlaid copper winding. The AL2018-0000-0001comes with pre-assembled cables providing a simplified installation experience. The unit comes with protection from thermal overload through an integrated temperature sensor. The AL2018-0000-0001 operates alternatively with or without water cooling. The AL2018-0000-0001 is built with the N/S winding type and has a maximum speed of 3.5 m/s to 7 m/s.
The AL2018-0000-0001 features Peak force of 1350 N while the peak current is rated as 19.6 A. the continuous Force with air cooling is rated as 600 N while the continuous current with air cooling is 6.45 A (N). The unit features a Force Constant of 93 N/A while the motor constant is 1140 N2/W. The magnetic attraction Force is rated as 2450 N while the weight of the coil is 3.8 kg.
The air gap is 0.5 millimeters. The AL2018-0000-0001 features a rated voltage of 400 to 480 volts while the accelerations run up to 30 grams. The peak forces fall between 225 N to 1,800 N, while the linear servo motor does not come with any mechanical wear. The AL2018-0000-0001can be connected to another linear servomotor acting together on a magnetic track. With the linear motors connected with one another, the forces of the motors are added together on the magnetic track. The motors are connected in parallel to the controller leading to a higher total current. Note that linear servomotors of the same type can be connected to one another. The wiring should be done in accordance with the layout of the coils. Get this motor from Wake Industrial with a one-year warranty.