Product Description

Bosch Rexroth is mainly concerned about its product quality and customer satisfaction. The company product such as drive controllers, digital servo drives, and frequency converters are widely used in the international market.

The HDS04.2-W200N-HT19-01-FW model is used to control and monitor the functions of the AC synchronous motors. The HDS drive controller belongs to the family of the digital intelligent drive system. The DIAX 04 drive system consists of a power supply unit, drive controller, and servo motor. The HDS drive controller is a quick-response drive and it is suitable to use as a servo and main drive in machine tools, robotics, and textile machines. It takes power from the respective power supply unit and operates at the rated current of 200 A. The model undergoes the maximum power loss of 800 W while operating at the continuous current of 120 / 80 A. The model should be installed vertically into the control cabinet and the total weight of the controller is approximately 19 kg. The basic unit (HDS04.2-W200N) of the model consists of 5 plug-in slots which are used to install different plug-in modules according to the required configurations.

The model HDS04.2-W200N-HT19-01-FW operates at the CLC-D02.3M-FW firmware module which contains the required parameters of the drive and the operating software. The DSS02.1M type SERCOS interface module is installed in this model for developing a real-time communication between the drive, control, and the motor. The ideal operating temperature range for this module is +5 to +45 degree Celsius. The HDS drive controller is protected by IP 10 protection class and it comes with a built-in blower unit for cooling purposes. You can get this HDS04.2-W200N-HT19-01-FW product from Wake Industrial. This unit can be shipped globally with a one-year warranty period from Wake Industrial.