EHA-RMP-201-A-20 Vickers
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 02-104838
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Vickers EHA-RMP-201-A-20 is part of the Vickers Accessories series and supports a differential input signal type with an input impedance of 100 kiloohms and a signal range of ±10 volts. It operates with a supply voltage range from 18 to 36 VDC and can withstand enable voltages between 12 and 40 VDC. The device has a maximum input power of 6 watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EHA-RMP-201-A-20 is an electronic ramp-generator module manufactured by Vickers as part of the Vickers Accessories series. It conditions command signals for proportional hydraulic valves, converting abrupt voltage steps into linear ramps that limit pressure spikes and improve actuator stability within automated machinery.
Signal handling begins with a differential input that tolerates up to ±10 V, while presenting an input impedance of 100 kΩ so controller outputs remain lightly loaded. Internal consumption is capped at 6 W, letting the board share cabinets with heat-sensitive devices. The unit operates from industry-standard DC rails spanning a minimum of 18 VDC to a maximum of 36 VDC; within this window the circuitry reproduces the command on its ramp output over the same ±10 V range without distortion.
The enable interface adds safety and timing flexibility. Output is forced to zero when the terminal falls below the 3.5 V disable point, and normal service resumes once the line rises above 12 V and can reach up to 40 VDC without damage. The shaped reference can source as much as 5 mA, adequate for most valve drivers. Ramp duration is user-adjustable through the front potentiometer; it can be shortened to 50 ms for fast response or extended toward the 5 s limit for gentle starts. Continuous performance is specified between 0 °C and 50 °C, allowing installation in typical control enclosures without auxiliary climate control.
Frequently Asked Questions about EHA-RMP-201-A-20:
Q: What is the supply voltage range for the EHA-RMP-201-A-20 module?
A: The EHA-RMP-201-A-20 has a minimum supply voltage requirement of 18 VDC and can operate up to a maximum of 36 VDC.
Q: What type and range of input signals can the EHA-RMP-201-A-20 accept?
A: This module accepts a differential input signal within a ±10 V range for control purposes.
Q: What is the maximum input power required by the EHA-RMP-201-A-20?
A: The maximum input power consumption for this device is 6 W during operation.
Q: What is the ramp output voltage for the EHA-RMP-201-A-20?
A: The ramp output voltage provided by this unit is ±10 V, suitable for proportional control applications.
Q: What ramp time range can be set on the EHA-RMP-201-A-20 using its potentiometer?
A: The module allows ramp time adjustment from a minimum of 50 ms up to 5 seconds using its potentiometer.
