EHA-DSG-201-A-10 Vickers
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Vickers EHA-DSG-201-A-10 is part of the Vickers Accessories series and features 16 selectable setpoints along with a nominal supply voltage of 24 V DC. It has an analog input impedance of 1 Megaohm, a reference output voltage of +10 V DC, and is housed in Polyamide 6.6. This accessory is compatible with DIN rails EN 50022 and EN 50035, offers IP20 ingress protection, and weighs 0.3 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EHA-DSG-201-A-10 accessory module is produced by Vickers within the Vickers Accessories series. It mounts directly on a DIN rail inside a control cabinet and functions as an electronic interface that conditions low-level command signals for proportional or servo-controlled hydraulic equipment used in automated machinery.
During operation the module draws a nominal supply of 24 V DC, permitting direct connection to the standard control-system power rail. The analog command channel presents 1 MΩ of input impedance, so the source amplifier or PLC card sees almost no additional loading. If binary selection is preferred, the switched input path offers 2.7 kΩ, allowing clear on/off discrimination without external pull-ups. For external potentiometer excitation the board provides a stabilized reference of +10 V DC within tight tolerance, ensuring repeatable feedback scaling. Rail engagement follows profile EN 50022, and a secondary latch also fits the legacy EN 50035 rail, making the module interchangeable across existing and new panels. Quick spring engagement further shortens replacement time during maintenance.
Mechanical and environmental characteristics support secure cabinet installation. The enclosure body is molded from Polyamide 6.6, giving inherent insulation and resistance to common hydraulic-fluid residues. Screw-clamp terminals accept conductors up to 2.5 mm², so standard sensor cable can be connected without ferrules. The device adds only 0.3 kg to the rail, eliminating the need for auxiliary supports or end brackets. Protection is rated at IP20, providing finger-safe barriers as long as the panel door remains closed. Internal logic offers 16 selectable setpoints, enabling a controller to toggle between calibrated flow, pressure, or speed profiles without sending new analog values.
Frequently Asked Questions about EHA-DSG-201-A-10:
Q: What is the nominal supply voltage required for the EHA-DSG-201-A-10?
A: The EHA-DSG-201-A-10 operates with a nominal supply voltage of 24 V DC.
Q: What reference output voltage is supplied by the EHA-DSG-201-A-10?
A: This accessory provides a reference output voltage of +10 V DC for connected devices.
Q: What material is used for the housing of the EHA-DSG-201-A-10?
A: The housing of the EHA-DSG-201-A-10 is constructed from Polyamide 6.6.
Q: What is the analog input impedance of the Vickers EHA-DSG-201-A-10?
A: The analog input impedance for this model is rated at 1 MΩ, ensuring compatibility with most control signals.
Q: How many selectable setpoints are available on the EHA-DSG-201-A-10?
A: This unit offers 16 selectable setpoints for flexible operation adjustments.
