Product Description

The T818T-036 is a DC servo motor. It is part of the Sanmotion T series from Sanyo Denki. Flange size of the motor is 87.5 millimeters. A flange is a square or circular part of the motor housing with holes for screws. It enables attachment of the motor, and hence its shaft, to the machine or equipment to which the motor connects. Sanyo has designed the T818T-036 motor for 48 Volts DC input. Its rated power output is 180 Watts. The nominal current rating is 5.3 Amps and the peak current rating is 40 Amps. The nominal speed rating of the DC servo motor is 3000 RPM. Load rating of the motor is 10 kiloohms and its weight is 3.2 kilograms. The motor is equipped with a tacho generator for feedback. Tacho generators are a type of sensor, similar to resolvers and encoders, that are used on motors for measuring speed and shaft position. They are electromechanical devices that convert shaft speed into a proportional output voltage. Servo amplifiers receive the tacho generator output, and use this real-time motor feedback as a factor for control algorithms that determine the amplitude and frequency at the output of the servo amplifier. Insulation class of the T818T-036 motor is F. The insulation resistance is 500 Volts DC. Sanyo has designed the motor with a fully enclosed housing with IP43 protection rating. The recommended ambient temperature for operation is from 0 to 40 degrees Celsius. Motor use outside this range leads to output derating. The ambient humidity during operation should be between 20 and 90%. Condensation is not permitted for motor operation. An oil seal is available as an optional accessory. A black coating provides robust protection against contaminants present in the operating environment.