V730-012EL8 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The V730-012EL8, from Sanyo Denki's Super DC Servo Motors, is a UHF RFID Antenna with linear polarization. It operates within a frequency range of 865 MHz to 928 MHz, a gain of 6 dBi, and an impedance of 50 Ω. The antenna features an IP65 ingress protection, operates between -20°C and +55°C, and weighs 700 grams.
Internal Product Review
The V730-012EL8 is a powerful 300W DC servo motor designed for efficient motion control. It has a peak torque of 2.45 Nm and 2500 rpm operating speed. This motor is ideal for high-precision applications such as robotics, CNC machines, and automated systems requiring quick response and smooth motion.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The V730-012EL8 is a super DC servo motor from Sanyo Denki, designed with a rated power of 300 W. It operates on a rated armature voltage of 75 VDC and supports a continuous rated torque of 1.05 Nm. This motor uses a totally enclosed case that is IP43 protected against water and dust.
The V730-012EL8 motor provides a peak turning effect of 2.45 Nm and its rated operating speed is set at 2500 rev/min while its maximum supported speed reaches up to 4000 rev/min under standard conditions. It includes a built-in incremental optical encoder, which provides 1000 ppr with line driver output, that is suitable for closed-loop motion control systems. This motor is designed without an internal brake unit and its shaft comes in a plain design, with standard key fitment. To ensure smooth motion at higher speeds along with quick response, its rotor inertia value is 0.0002708 kg·m². Torque constant of this unit is 0.273 Nm/A along with a back emf of 28.6 mV/rpm. The V730 DC motor features an armature resistance of 1.1 Ohms and its inductive rating is approx. 1.6 mH. Its operating thermal range is between 273.15 K to 313.15 K and it allows up to 90% of relative humidity in a non-condensing environment.
The V730-012EL8 motor comes in a frame diameter of 76 mm and 1000 mm of pre-attached cable length. It is compatible with Sanyo Denki’s TS1AA2AA servo amplifier and the requires input voltage for amplifier is DC 140 V, while the control voltage requirement is DC 24 V. The V730 DC motor works efficiently with control drives and it mass including the encoder is nearly 2.75 kg. It can be purchased online from Wake Industrial.
