CN-410T-30A2

Product Description:

The CN-410T-30A2 by Sanyo Denki lands inside the Super DC Servo Motors family. This servo motor comes sized for work with a mass of 0.95 kg and shows up with a rated output of 110 watts. A key stat is the rated rotating speed – 3000 rpm, so quick moves are handled on schedule when cycles need to be tight and regular. The whole package matches up well in places where space is a bit limited, but output can't drop. The armature voltage sets in at 75V, pushing the strength needed for automated machines—anything that requires steady follow-through, precision stops, or jumps back and forth gets help from numbers like these.

Protection and reliability go up from some parts that came before it, since this servo motor has support for oil seal installation. The option for oil seal means that use in dusty or slightly leaky, oily environments won’t shut operation down or gum things up with debris. For vibration and gear setups, things don’t get stuck thanks to gear options like 1/15, 1/30, 1/60, and 1/90, widening where this model can belong. The \heatup limit stands at 105 kK, letting this model tick through shift after shift without slipping due to temperature jumps, and a torque constant of 0.21 nm/A brings out smoother acceleration commands from the controller.

Some features stick out for longer service and low hassle. Torque doesn’t drop off sharply with rated torque listed at 0.34 nm and torque ripple at 9%, so movement feels even instead of jagged when loads ramp up or die down. Installers won't waste much time—this is under one kilogram, ships simple, and puts flexible feedback into automation.