RS2A03A8AA4
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The RS2A03A8AA4 servo drive delivers a rated output of 100W, a continuous torque at stall of 0.318 Nm, and a peak torque at stall of 1.18 Nm. Part of the R SANMOTION Servo Drives series by Sanyo Denki, it supports an amplifier power supply of AC200V to 230V and a rated speed of 3000 RPM for reliable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
RS2A03A8AA4 is an industrial servo amplifier from Sanyo Denki. It is part of the Sanmotion R product range. The amplifier is designed for speed/torque/position control of Sanyo rotary motors. Its capacity is 30 Amps and the input voltage is 200 Volts AC. The amplifier has an analog pulse control interface. The device supports pulse encoder input. It features an integrated regenerative resistance and dynamic brake resistance. Additional features include velocity/torque command input and safe torque off. Safe torque off (STO) is a safety function used in motor drives and servo systems to prevent motors from generating torque, effectively stopping motion without physically cutting power to the entire drive system. STO disables the drive's ability to power the motor, ensuring it cannot rotate, even if a control signal tries to make it move.
The amplifier weighs 0.95 kilograms and its dimensions are 160 x 50 x 130 millimeters. RS2A03A8AA4 is a single-shaft amplifier with a consolidated power supply. It can be configured for daisy chain configuration via setup software. The frequency of velocity response has been increased to 1200 Hertz, which the double that for previous models. A nameplate is attached to the unit, and the model number listed on it must be verified at the time of delivery. Metal fittings are available for front mounting. The unit also supports rear-mounting. Sanyo recommends leaving at least 50 millimeters of space on the top and bottom sides for airflow. The temperature of air around the unit must not exceed 55 degrees Celsius. Ideally, the temperature should be kept below 40 degrees Celsius for amplifier longevity. The air intake and exhaust vents must be kept clear of obstructions.
Frequently Asked Questions about RS2A03A8AA4:
Q: Does the amplifier support safe torque off?
A: The amplifier supports safe torque of with delay circuit.
Q: What is the interface type on the unit?
A: Interface type on the unit is analog pulse control.
Q: Is velocity/torque command input available?
A: Velocity/torque command input is available.
Q: Which type of encoder does the amplifier support?
A: The amplifier supports pulse encoder.
Q: What is the ambient working temperature?
A: The ambient working temperature is 0 to 55 degrees Celsius.
