RS1L03AV0360MB00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki RS1L03AV0360MB00 is part of the R SANMOTION Servo Drives series and features a rotary motor structure with a 30 Amp amplifier capacity. It uses an IGBT PWM sinusoidal control system, has a built-in dynamic brake and regeneration process, and operates on a 200 V AC power supply. The servo drive has a control power input of single-phase AC and is designed for storage temperatures from -20 to 65 degrees Celsius.
Internal Product Review
The RS1L03AV0360MB00 is a Sanyo Denki R SANMOTION servo drive built with an IGBT PWM sinusoidal drive control system and 30 A amplifier capacity. Built-in dynamic braking and built-in regeneration give this unit very solid deceleration control and efficient energy handling in servo applications. Single-phase AC control power with an AC 170 to 253 V input range makes this drive a well-engineered choice for consistent industrial motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RS1L03AV0360MB00 is a servo amplifier produced by Sanyo Denki for the R SANMOTION Servo Drives series. It governs the torque and velocity of compatible rotary servomotors in automated machinery by modulating three-phase output waveforms from a constant industrial power supply. The unit belongs to the manufacturer’s tray-type drive platform, allowing it to slide into control panels without additional brackets. It also integrates regenerative energy handling, so an external braking resistor is not mandatory for standard operation.
The amplifier can deliver up to 30 A of phase current, representing the maximum continuous motor winding load that the power stage can sustain. It accepts a mains supply within the 170 to 253 VAC range through a single-phase AC input, allowing smaller distribution transformers to feed the control circuitry. Current is switched by an IGBT PWM sinusoidal drive topology, which reduces harmonic distortion and limits motor heating at high repetition rates. A built-in dynamic brake dissipates kinetic energy during rapid deceleration, helping prevent DC-bus overvoltage without separate braking hardware. The unit tolerates relative humidity levels up to 90% in non-condensing production areas. Its internal regeneration circuit channels excess power back to the shared DC link when duty cycles involve frequent reversals.
The power stage belongs to the 200 VAC class, making it compatible with common Japanese and North American industrial power systems. Diagnostic test points provide a speed-monitor output of 2.0 V ±10% and a torque-monitor output with the same range, allowing loop response to be checked with standard measurement equipment. Components can withstand storage and transportation temperatures from -20 to +65 °C, while conformal coatings protect the circuitry from airborne contaminants during storage. The amplifier withstands vibration frequencies from 10 to 55 Hz, helping maintain connector integrity when the enclosure is mounted near reciprocating equipment or on moving gantries. These operating limits support installation in non-condensing industrial environments where temperature, vibration, and repetitive motion must be considered. Proper panel spacing and secure connector installation help preserve airflow and electrical contact during continuous machine operation.
