Product Description

The Q2AA2211KVXD22 is an AC servo motor belonging from Sanyo Denki’s SANMOTION Q series. It is designed for high-torque and precision needs. The Q2AA2 servo motor has a rated current of 42 Arms and the looked rotor current during continuous running is 48 Arms. It operates in an ambient temperature up to 50 °C and humidity 90%.

The Q2AA2211KVXD22 servo motor has a 220 mm nominal size of a flat shaft flange. It has a speed of revolution 2000 per minute. It includes a high-resolution absolute encoder PA035M with incremental signal functionality. It has a high-resolution absolute encoder PA035M with incremental signal. The encoder has a resolution of 131072 pulses per revolution. The Q2AA2 servo motor's torque constant is 1.69 Nm per Arms and the induced voltage constant is 45.1 mV per min⁻¹. The armature resistance per-phase is 0.015 Ohms for minimal energy loss as well as the inertia of the rotor is 186×10⁴ kgm². The Q2AA2 servo motor is equipped with an A-type 1/3 gear for direct integration into geared systems. It has a rated power of 11 kW and does not come with a holding brake. The Q2AA2 servo motor has electrical time constant 0.33 milli seconds as well as the mechanical time constant of 4.2 milli seconds. It operates on a 200V power supply and is CE marked for standard compliance. It can support a peak current up to 130 Arms.

The Q2AA2211KVXD22 servo motor weighs 11 kilo grams with the encoder and meets IP67 protection standards to make it suitable for harsh environments. It offers consistent performance in automated systems that require precision, reliability and high torque output. The Q2AA2 servo motor has a 70 Nm rating, a 80 Nm stall torque and an instantaneous maximum stall torque of 176 Nm.