Q2AA08075DXS5X Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08075DXS5X is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with a flange size of 86mm and a rated output of 750W. The motor operates at a supply voltage of 200V and can reach maximum rotation speeds between 4500 and 5000 min-1. It uses a reduced wiring incremental encoder for sensor technology and does not include a holding brake.
Internal Product Review
The Q2AA08075DXS5X is a Sanyo Denki Q SANMOTION servo motor with 750W rated output and a 200V motor supply. Medium-inertia construction and a reduced wiring incremental encoder support stable motion response and efficient integration in servo systems. Maximum rotation speed up to 5000 min-1 makes this model an excellent choice for dynamic positioning applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08075DXS5X is a servo motor manufactured by Sanyo Denki within the Q SANMOTION Servo Motors series. It is intended for closed-loop motion control in automated assembly, packaging, and material-handling equipment where precise shaft position and speed are required to synchronize machine cycles. The motor converts commands from a compatible servo drive into controlled rotary movement for indexing, conveying, and positioning tasks. Feedback from the motor allows the drive to correct changes in shaft position and speed as the connected load moves through each programmed cycle.
The motor provides a continuous shaft output of 750 W, supplying three-quarters of a kilowatt of mechanical power for medium-load applications. Its maximum speed range is 4500 to 5000 rpm, supporting machinery that requires rapid positioning and short cycle times. A voltage rating of 200 V matches compatible low-voltage, three-phase servo drives used in 200-volt control systems. Mounting uses an 86 mm square flange, allowing the motor to attach directly to compatible gearboxes, couplings, or machine frames. The medium-inertia design balances acceleration response with load-matching capability, helping the drive maintain stable motion when operating moderate mechanical loads. The motor is supplied without a holding brake, so the drive or an external mechanical device must retain the load when power is removed.
The permitted operating temperature range is 0 to 40 °C, making the motor suitable for standard indoor factory conditions when adequate airflow is available. It tolerates up to 90% relative humidity when condensation is prevented, allowing operation in production areas where moisture levels vary. Position and speed feedback are supplied by a reduced-wiring incremental encoder, which uses fewer connections while transmitting incremental motion signals to the controller. The available encoder variants are PP031, PP038, and PP062, providing different pulse counts so the feedback resolution can be matched to the motion-control requirements. Proper encoder selection supports accurate position tracking, while the reduced-wiring arrangement helps simplify signal cable routing between the motor and servo drive.
