Product Description

The Q1AA06020DXS00 is a low inertial servo motor designed by Sanyo Denki to serve as a reliable source of kinetic energy in automation systems. This motor has found relevance in several industries all over the world; it operates with an input voltage of about 200 volts and is able to reach an operation speed as high as 5000 revolutions per minute. The Q1AA06020DXS00 motor unit is equipped with a flange that has an angle dimension of about 60 millimeters, and its rated power output is also estimated to be about 200 watts. This unit is classified as a standard product without a holding brake; however, its output shaft is able to withstand a maximum radial load of about 390 newtons and a thrust load as high as 200 newtons during its assembly. During operation, the maximum possible radial load that can be supported by the motor shaft is about 200 newtons.

The Q1AA06020DXS00 can be installed and operated in a moving location; however, special care should be taken to ensure that no excessive stress is applied to its connection cables. This motor unit has a continuous time rating; it is also considered to fall under the Type F insulation classification. During operation, the insulation resistance at the motor is more than 10 megaohms. Although the Q1AA06020DXS00 has a fully closed housing, it is an IP40 device and should be properly installed indoors, away from interference.

The Q1AA06020DXS00 is covered in a Munsell 1.5 equivalent coating that protects it from chemically active compounds like dilute acids and alkali. The vibration classification of the motor unit is also V15. During operation, the relative humidity of around the Q1AA06020DXS00 should be between 20 to 90 per cent.