PY9A150U0XXXC08 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki PY9A150U0XXXC08 is part of the PY Super BL Servo Amplifiers series and has a mass of 8.5 kg. It features built-in regenerative processing and dynamic brake, supports velocity, torque, and position control functions, and operates with a frequency response of 400 Hz. The amplifier has a velocity control range of 1 to 5000 and can withstand shock resistance up to 2 G and vibration resistance up to 0.5 G.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY9A150U0XXXC08 servo amplifier is built by Sanyo Denki for the PY Super BL Servo Amplifiers series. This panel-mounted module conditions DC bus power and applies closed-loop control signals so a matched servo motor can execute precise velocity, torque, or position commands in industrial machinery. The unit provides interface signals through standard analog connectors and is sized for medium-capacity axes such as pick-and-place heads and electronic gearing stages. Its compact control architecture allows the amplifier to regulate motor behavior while remaining suitable for installation inside an industrial control cabinet.
Closed-loop dynamics begin with a frequency response of 400 Hz, allowing the drive to reproduce rapid command changes without noticeable phase lag. Speed is regulated across a 1:5000 velocity control range, so low-speed creep and high-speed travel can be achieved with the same motor. The current limit accepts an analog reference of ±2.0 VDC ±10%, allowing the motion controller to limit peak torque electronically. A built-in dynamic brake helps decelerate the connected motor during emergency stops. The amplifier also accepts a separate ±2.0 VDC velocity command for analog speed control. An internal display presents operating states and alarm information directly on the unit, allowing faults and active conditions to be reviewed at the control cabinet.
The amplifier weighs 8.5 kg, supports installation at elevations up to 1000 m above sea level, and operates in ambient humidity up to 90% RH without condensation. Its housing can withstand 2 G shocks and 0.5 G of continuous vibration, supporting cabinet installation in mobile machinery or equipment exposed to repeated mechanical movement. The available operating selections are velocity, torque, and position modes, allowing the drive to support several types of controlled motion. Two monitor outputs provide real-time signals for supervisory controls, with a 2.0 V ±10% output for velocity and a 2.0 V ±20% output for current. Built-in regenerative processing routes surplus electrical energy to an internal resistor, reducing the need for external regenerative hardware. The LCD panel displays fault codes and operating information so drive conditions can be checked without a separate display device.
