Product Description:

The PY2C030UDXXXC00 is a servo amplifier manufactured by Sanyo Denki for the PY Super BL Servo Amplifiers series. In automation lines, it conditions power and processes command signals so that connected brushless servomotors can follow precise velocity, position, or torque references generated by a motion controller. By regulating motor current in real time, the unit enables repeatable axis performance in pick-and-place gantries, packaging stations, and semiconductor tools.

An output capacity of 30 A sets the maximum continuous phase current the amplifier can supply without derating, allowing it to drive midsize rotary or linear motors during demanding acceleration cycles. The selectable modes provide velocity, torque, or position control, allowing the feedback loop to be matched to the application without changing the amplifier. Within velocity regulation, a speed range of 1:5000 permits accurate operation from base speed down to 0.02% of the rated speed, which is useful for indexing conveyors or slow inspection passes. The closed-loop bandwidth reaches 400 Hz, so the drive can correct load-induced disturbances quickly and maintain commanded motion profiles when inertia or cutting forces change abruptly.

Diagnostic visibility is provided by an analog monitor port with an output of ±3 V peak, giving a real-time representation of current or velocity feedback on an oscilloscope. Thermal stability is maintained through forced-air cooling, with an internal fan directing airflow across the heat sink to remove switching losses. The housing stands 168 mm tall and 135 mm deep, helping it fit into shallow control panels while supporting operation at altitudes up to 1000 m and in noncondensing humidity up to 90% RH. The feedback cable can extend up to 30 m without signal boosters, allowing encoders on distant axes to connect directly to the amplifier.