PY2B050C62S8P01 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The PY2B050C62S8P01 is a servo amplifier from Sanyo Denki's PY Super BL Servo Amplifiers series with a 50 Amp capacity and uses forced air cooling. It supports a control power input of 200 to 230 VAC, 1-phase at 50/60 Hz and operates within temperatures from 0 to 55 degrees Celsius. The amplifier has a frequency characteristic of 400 Hz and a velocity control range of 1 to 5000.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY2B050C62S8P01 servo amplifier is produced by Sanyo Denki within the PY Super BL Servo Amplifiers series. It is intended for precision motion systems, where it converts reference commands into regulated motor currents. By forming the link between a CNC or PLC and the servo motor, the unit enables programmable velocity, position, and torque control on pick-and-place modules, packaging lines, and similar industrial axes. The amplifier monitors feedback and enforces protective limits, supporting stable long-term operation in new or retrofitted brushless drive systems.
The drive can deliver up to 50 A of output current, allowing it to energize medium-frame servomotors without saturation. The control electronics and fans draw power from a separate 200 to 230 VAC single-phase supply operating at 50/60 Hz, which simplifies cabinet wiring. Speed regulation is maintained across a ratio of 1:5000, allowing the same axis to move slowly at inspection speed or run at full throughput while maintaining feedback resolution. Internally, the amplifier processes command signals up to 400 Hz, aligning with the frequency characteristics of modern compact motors. Heat is removed through forced-air cooling, which directs airflow across the switching devices and keeps the case temperature within its operating range.
The housing stands 168 mm tall and extends 135 mm deep, permitting installation in shallow 200 mm enclosures next to other control hardware. The design omits a dynamic brake, so external braking components must be selected when rapid stopping is necessary. Leakage current through a two-meter shielded cable remains limited to 1.5 mA, which helps the installation meet touch-current safety limits. Reliable operation is supported at ambient temperatures from 0 to 55 °C and at elevations up to 1000 m above sea level without power derating. For storage or transportation, the allowable temperature ranges from -20 to 65 °C.
