PY2A050T6MENP1A Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki PY2A050T6MENP1A is a servo amplifier from the PY Super BL Servo Amplifiers series with an amplifier capacity of 50 Amps and a control rush current of 40 Amps. It features built-in dynamic brake and regenerative resistor, and supports a velocity control range of 1 to 5000. This model operates on a 200 VAC input voltage class and weighs 2.7 kilograms.
Internal Product Review
The PY2A050T6MENP1A is a Sanyo Denki PY Super BL servo amplifier with 50 A amplifier capacity and a 200 VAC input class. Built-in dynamic brake and built-in regenerative resistor support controlled deceleration and efficient energy handling in motion systems. Strong frequency characteristics at 400 Hz make this amplifier an excellent choice for responsive servo control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY2A050T6MENP1A is a servo amplifier produced by Sanyo Denki for the PY Super BL Servo Amplifiers series. This unit drives matched Super BL servo motors in machine tools, pick-and-place stations, and other motion platforms by converting AC input into precisely regulated phase currents. The amplifier allows an axis controller to command torque, velocity, or position through the connected motor. A dynamic brake and regenerative resistor are built into the power stage, eliminating the need for external braking components in supported applications.
The power section is rated for a continuous output of 50 A, allowing the amplifier to support demanding motor loads. During control initialization, the circuitry tolerates a peak command current of 40 A, while the input filter restricts mains-side inrush current to 23 A. A three-phase supply in the 200 VAC class feeds the converter, and its bandwidth extends to 400 Hz. This bandwidth allows the drive to follow rapid reference changes associated with electronic gearing and contouring programs. Separate monitor terminals provide a 0.5 V output with a tolerance of ±20% for phase current at full load and for shaft speed at 1000 rpm. These monitor signals allow real-time operating data to be sent to a PLC or oscilloscope without placing probes in the power circuit.
Leakage current to ground remains below 1.5 mA when the motor cable is 2 m long, supporting safe operation in properly grounded installations. The aluminum frame weighs 2.7 kg, allowing panel mounting without substantial structural reinforcement. Closed-loop velocity control covers a ratio of 1:5000, enabling slow indexing and high-speed traverses from the same axis. Operation is permitted at up to 90% relative humidity in condensation-free environments. The amplifier can operate at altitudes up to 1000 m, making it suitable for most factory locations without altitude-related adjustments. It also withstands vibration of 0.5 G and shock of 2 G, helping the internal current and velocity monitoring circuits maintain stable performance under typical industrial operating conditions.
