PY2A030A2MA1P00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki PY2A030A2MA1P00 is part of the PY Super BL Servo Amplifiers series and supports a 200 VAC, 3-phase input with an amplifier capacity of 30 Amps. This servo amplifier features a built-in dynamic brake and a wiring-saved incremental encoder with a resolution of 2000 pulses per revolution. It weighs 2.0 kg and has a frequency characteristic of 400 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY2A030A2MA1P00 servo amplifier is produced by Sanyo Denki and belongs to the PY Super BL Servo Amplifiers series. Designed to drive matching Super BL servomotors, the unit supplies controlled three-phase power and processes feedback for position loops in automated machinery. By combining command handling, power conversion, and protection in one chassis, the amplifier provides the torque, speed, and positioning control required in pick-and-place stations, packaging lines, and similar motion applications.
The amplifier is rated for a continuous output of 30 A, allowing it to energize medium-frame Super BL motors under sustained loads. It accepts a 200 VAC supply through a three-phase main circuit and draws an inrush current of 23 A when its capacitors charge at power-up. During command switching, the control section can experience a peak inrush current of 40 A, so upstream protective devices must tolerate this brief event. The current monitor port produces 0.5 V ±20% at 100% load, providing a proportional signal for observing current demand. A frequency response of 400 Hz allows the amplifier to track rapid torque commands. The amplifier does not include a regenerative resistor, so an external resistor is required when the load returns energy to the drive.
For motion feedback, the unit uses a Wiring-Saved incremental encoder with a resolution of 2000 pulses per revolution, delivering position data to the position-control interface. Speed control operates from 1 rpm to the upper limit across a 1:5000 velocity range, while a separate velocity monitor produces 0.5 V ±20% at 1000 rpm for diagnostic measurements. A built-in dynamic brake quickly stops the motor when the enable signal is removed. The brake operates independently of the external regenerative resistor used to dissipate returned energy. The sensor channel and amplifier use common cabling, reducing the number of individual connections required in multi-axis panels. The device has a mass of 2.0 kg, allowing it to be installed in lightweight panel and rack assemblies.
