PY2A030A0MG1S00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki PY2A030A0MG1S00 is a servo amplifier from the PY Super BL Servo Amplifiers series, supporting an amplifier capacity of 30 Amps and a 3-phase main power supply. It features speed control, a built-in dynamic brake, and has a frequency response of 400 Hz. This amplifier weighs 2.0 kilograms and is compatible with the P50B08100H motor.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY2A030A0MG1S00 is a servo amplifier manufactured by Sanyo Denki for the PY Super BL Servo Amplifiers series. It drives the company’s P50B08100H brushless motor and functions as a velocity-loop controller in industrial automation. The amplifier converts three-phase mains power into regulated motor current, helping the connected motor maintain a stable speed as the mechanical load changes. A built-in dynamic brake brings the axis to a quick stop when power is removed. Because the amplifier does not contain a regeneration resistor, excess braking energy must be diverted to an external resistor.
This model can supply up to 30 A of continuous output current, and its current loop remains stable at frequencies up to 400 Hz, allowing responsive speed control in rapid processes. At power-up, the control and main circuits draw an inrush current of 40 A / 23 A, so upstream protection devices must accommodate the initial demand. The amplifier accepts encoder feedback with a resolution of 2000 P/R. Its velocity control range of 1:5000 supports precise speed regulation across a broad operating range. Speed commands are handled through a dedicated speed-control interface, while the three-phase input terminals simplify connection to the mains supply. The compatible motor connection supports integration with the P50B08100H brushless motor.
The aluminum housing measures 168 × 135 mm, providing a compact profile for installation inside an electrical cabinet. The unit weighs 2.0 kg, so it can be mounted without requiring heavy structural support. Leakage current is limited to a maximum of 0.5 mA, which helps reduce the risk of unintended ground-fault activation. The current and velocity monitor outputs each provide a reference signal of 0.5 V ±20% for measurement during system setup and troubleshooting. These monitor signals allow operating behavior to be observed without interrupting the command path. The built-in brake also reduces the amount of external stopping circuitry required, while the three-phase mains connection allows the amplifier to share a suitable power bus with other motion-control devices.
