PY0A030A0132S01 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki PY0A030A0132S01 is a 2.2 kg servo amplifier from the PY Super BL Servo Amplifiers series with an amplifier capacity of 30 Amps and a main power capacity of 1.3 kVA. It operates at a frequency of 400 Hz, with shock resistance up to 2 G, and a maximum ambient temperature of 55 °C. Control inrush current is 40 Amps, and it supports a velocity control range of 1 to 5000.
Internal Product Review
The PY0A030A0132S01 is a Sanyo Denki PY Super BL servo amplifier with 30 A amplifier capacity and 1.3 kVA main power capacity. Stable motion performance stands out with ±0.1% load speed variation and a 1:5000 velocity control range. Technical execution feels well suited for precision drive applications, with 400 Hz frequency characteristics as a strong finishing detail.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PY0A030A0132S01 servo amplifier is produced by Sanyo Denki for the PY Super BL Servo Amplifiers series. Intended for pairing with brushless servomotors in automated machinery, the unit converts an incoming three-phase supply into regulated armature current and closes the velocity loop in drive systems. By delivering precise torque commands, it allows packaging lines, pick-and-place axes, and material handling cells to maintain consistent motion profiles under load disturbances. The amplifier also acts as the interface between a motion controller and the motor, executing current vector control and managing feedback signals so that the mechanical axis follows commanded speed trajectories.
The power section can supply a continuous phase current of 30 A, while the main circuit draws up to 1.3 kVA under rated load. During power-up, the main bus momentarily reaches an inrush current of 18 A, and the control circuit can surge to 40 A before settling at a steady demand of 40 VA. With frequency characteristics of 400 Hz, the velocity loop tracks commands quickly across a speed range of 1:5000. Steady-state speed remains within ±0.1% of the setpoint during changes in load or supply voltage, and temperature drift is limited to ±0.5%. These performance margins are supported by phase-locked current regulation that prevents overshoot during reversal.
With a mass of 2.2 kg, the chassis mounts easily inside compact control enclosures. Operation is permitted at altitudes up to 1000 m, ambient temperatures up to 55 °C, and humidity levels up to 90% RH without condensation. The frame endures a shock load of 2 G and sustained vibration of 0.5 G, helping to prevent nuisance trips on mobile or high-impact equipment. These operating limits support use in production lines exposed to elevated heat, humidity, vibration, and occasional mechanical shock.
