PRS-2059C Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
59 Seconds
The PRS-2059C proximity sensor features a sensing distance of 5 mm for ferrous metals and operates at 10-30 V DC. Manufactured by Sanyo Denki, it belongs to the PRS Servo Drive Boards series and offers a protection rating of IP67. With a nickel-plated brass housing, it supports a 3-wire, 2m PVC cable.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Servo Drive PRS-2059C comes from the Sanyo Denki manufacturer. The PRS-2059C belongs to the PRS line of devices made for precise command applications of industrial automation systems. This device functions with single-phase AC as well as three-phase AC power source inputs. This servo amplifier functions under a power supply range between 200V to 240V AC.
The PRS-2059C servo drive receives a 5V DC power supply for performing signal processing through its logic section. This amplifier performs optical incremental encoder feedback integration as an integrated feature. The board implements signal filtering and amplification processes for all encoder lines inside its internal circuits. Operation within temperatures from 0°C to 55°C falls under the system's environmental support specifications. It is safe to handle the device when storing it at temperatures from -20°C to +65°C. The PRS-2059C servo drive functions normally under humidity levels between 5% and 90% RH, while non-condensation conditions exist. Coupled with autonomous single-phase AC power distribution, the control circuits operate. The board functions reliably at altitudes that do not exceed 1000 meters above sea level. The equipment supports vibration resistance during continuous operation at maximum levels of 4.9 m/s². The board demonstrates the ability to survive impact collisions of intensity 19.6 m/s².
The PRS-2059C servo drive operates through two interface modes, which are analog signal input and digital pulse interface. The diagnostic features appear on LEDs located on the front display panel. It includes regenerative resistors that control energy overflow from the load. The device allows installation through standard DIN rail brackets or through customized mount fixtures. A firm PCB design permits maximum utilization of space. This board brings easy operation fault identification through the labeled ports connected to its alarm system. The front-side rotary switch enables users to run fast fault simulation tests.
