PDT-S2020S04
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The PDT-S2020S04 power unit operates with a typical input voltage range of 200-240 V AC, delivers approximately 2-3 kW power, integrates overload and short-circuit protection, and utilizes efficient forced air cooling. Part of the PDT San Driver Servo Drives by Sanyo Denki, it features high efficiency above 90%.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PDT-S2020S04 is a supper power supply unit from Sanyo Denki. It is a compact product that features two high-capacity batteries that are able to meet the operation requirements of several PDT drive controller series. The housing of this product is also made from a strong metallic material that is covered in purple paint to prevent deterioration often caused by corrosive substances. The front panel of this product features up to 15 screw terminals through which it can be connected to other components in the servo system. There is also a protected integrated fuse with a current rating of 15 amperes installed into the power supply unit. This fuse provides protection against power surge and should be promptly replaced in the case of damage.
The PDT-S2020S04 power supply unit is easy to install for operation; it is also equipped with a LED display that provides information about its operation status in real-time. This power supply unit is intended for industrial indoor operation, but its enclosure does not provide protection against harsh environmental conditions such as the effect of water and dust. The input voltage requirement of this product is between 200 to about 240 volts; it can also supply an output current of about 3.0 amperes.
The PDT-S2020S04 superpower supply unit does not require frequency maintenance operation; as soon as it is properly installed, it can function at the top level for a long period without any problem. Operators of this product are required to pay special attention to the ambient temperature and relative humidity level around the product. For optimum operation, the power supply unit should not be used in environments with an ambient temperature of about 50 degrees; the surrounding relative humidity should also be maintained below 90 per cent.
Frequently Asked Questions about PDT-S2020S04:
Q: What certifications does the PDT-S2020S04 have?
A: The PDT-S2020S04 is CE and UL certified. It also belongs to the IP20 protection category.
Q: Can operators modify the PDT-S2020S04 to suit specific industrial applications?
A: The PDT-S2020S04 is delivered as a standard device. It does not require any kind modification.
Q: Can the PDT-S2020S04 be used at any height?
A: Yes. The peak installation height for the motor is about 1000 meters above sea level. Above this height, derating will be required.
Q: What is the permissible ambient temperature for the PDT-S2020S04?
A: The ambient temperature for the operation of the PDT-S2020S04 should between 0 to about 50 degrees.
Q: Is the PDT-S2020S04 an environmentally friendly device?
A: Yes. The proper operation of the PDT-S2020S04 does not have any negative effect on the environment.
