P80C18060BXS22 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
24 Seconds
The Sanyo Denki P80C18060BXS22 is a servo motor from the P8 Super BL Servo Motors series with a 600 W rated output and a maximum speed of 2000 min-1. It has a flange size of 180 mm, uses a wiring-saved incremental encoder, and features IP55 protection except for the shaft end. The motor is totally enclosed and self-cooling, and operates in temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P80C18060BXS22 servo motor is produced by Sanyo Denki within the P8 Super BL Servo Motors series. It serves as a brushless drive element that converts commanded current into accurate rotary motion for indexing tables, material-handling arms, and other industrial automation axes that require precise speed and position control. Integration with a matching drive is simplified by the series architecture, allowing the motor’s incremental encoder to close the feedback loop while the sealed housing supports installation inside or outside control enclosures without additional guards.
This model develops a continuous mechanical output of 600 W and can reach a maximum shaft speed of 2000 rpm, providing suitable performance for continuous-duty motion applications. A square, ISO-standard flange measuring 180 mm on each side provides direct coupling to gearboxes and load fixtures. Rotor position is reported through a reduced-wiring incremental encoder that generates 2000 P/R, giving the drive a fine position grid for smooth low-speed operation. The stator insulation has a dielectric strength of 1500 VAC for 1 minute, allowing the windings to withstand the applicable high-potential test voltage. The motor is designed for continuous operation and uses a totally enclosed, self-cooling construction that transfers heat from the housing to the surrounding air without an external blower.
The enclosure provides IP55 protection except at the shaft end, helping prevent dust and water jets from reaching internal components. The insulation system has a resistance of 10 MΩ or more at 500 VDC, supporting dependable electrical isolation between the windings and housing. Reliable service is maintained within a noncondensing humidity range of 20% to 90% RH and at ambient temperatures from 0 to +40 °C. The motor can be stored at temperatures from -20 °C to +65 °C without performance loss. Because the motor does not include a holding brake, vertical axes require an external clamping device or another method of preventing load movement when power is removed. The totally enclosed design also reduces the exposure of internal components to airborne contaminants during operation.
Frequently Asked Questions about P80C18060BXS22:
Q: What type of detector does the P80C18060BXS22 servo motor use?
A: The P80C18060BXS22 uses a wiring-saved incremental encoder as its detector type.
Q: What is the rated output power of the P80C18060BXS22?
A: This motor offers a rated output of 600 W for continuous operation.
Q: What is the maximum speed of the P80C18060BXS22 servo motor?
A: The maximum operating speed of this model is 2000 min-1.
Q: What is the flange size of the P80C18060BXS22 model?
A: The P80C18060BXS22 servo motor is built with a 180 mm flange size for mounting.
Q: What is the waterproof rating of the P80C18060BXS22 servo motor?
A: This motor features an IP55 waterproof rating, except at the shaft end.
