P80B22250HXS2C Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P80B22250HXS2C is a brushless servo motor from the P8 Super BL Servo Motors series with a rated output of 2.5 kW and a flange size of 220 mm. It features a wiring-saved incremental encoder with 2000 pulses per revolution, a rated speed of 2000 min-1, and IP67 protection rating. The motor has a peak stall torque of 30.0 N·m and a mass of 15.5 kg.
Internal Product Review
The P80B22250HXS2C is a Sanyo Denki brushless servo motor with a 2.5 kW rated output. A wiring-saved incremental encoder with 2000 P/R gives the unit clean feedback handling and dependable positioning performance. IP67 protection makes the motor an excellent choice for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P80B22250HXS2C is a brushless AC servo motor manufactured by Sanyo Denki for the P8 Super BL Servo Motors series. It uses an incremental encoder that transmits position feedback through a shared connection, reducing the need for additional sensor cables in compact machine layouts. In automated production lines, the motor delivers precise rotary actuation for indexing tables, pick-and-place heads, and other motion axes that require closed-loop control and strong ingress protection.
The motor has a square 220 mm mounting flange and provides a continuous power output of 2.5 kW. During steady operation, the shaft turns at 2000 rpm while delivering 12.0 N·m of torque, and the drive must provide a phase current of 21.4 A RMS to maintain this operating point. The phase resistance is 0.056 Ω, which helps limit copper losses at the nominal load. The 2000 P/R encoder provides fine velocity resolution, while a maximum speed of 3000 rpm allows operation above the rated speed when the application requires it. Rotor inertia is 27.1 × 10⁻⁴ kg·m², balancing responsive acceleration with load stability. Because the unit does not include a holding brake, position retention during power loss must be provided by drive torque or an external clamp.
For short operating bursts, the motor can withstand a peak stall torque of 30.0 N·m without demagnetization, supporting rapid cycle starts and temporary shock loads. Its IP67 enclosure prevents dust ingress and protects the motor during temporary water immersion, allowing installation near spray zones. The motor has a total mass of 15.5 kg, providing a stable mechanical structure and useful thermal capacity. With a torque constant of 0.66 N·m/A RMS, drive current commands correspond predictably to shaft torque and support accurate control adjustments. The brushless architecture eliminates mechanical commutator wear and reduces the maintenance associated with brushes. This design is well suited to repetitive motion applications that require precise feedback, dependable torque delivery, and protection from industrial contaminants.
